Tv Soundconnect - Samsung HW-J250 User Manual

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
▶ Connecting a TV to the Soundbar
1. Turn on the TV and Soundbar.
Set the "Add New Device" menu selection of
●
the TV to "On".
2. Press the ( ) button on the main unit's top
panel or the TV SOUND CONNECT button on
the remote control to select the TV mode.
The Green LED will blink indicating that
●
TV is not connected yet.
3. On the TV, a message asking whether to enable
the TV SoundConnect function appears.
"[Samsung] Soundbar" is displayed on the TV
screen.
4. Select <Yes> using the TV remote to finish
connecting the TV and Soundbar.
The Green LED will stop blinking when
●
the TV has successfully connected.
Switching the Soundbar's mode from TV
●
to another mode automatically terminates
TV SoundConnect.
To connect the Soundbar to another TV,
●
the existing connection must be
terminated.
To terminate the existing connection,
●
press and hold the p button on the
remote for 5 seconds to connect to the
other TV, follow Steps 1 through 4 above.
The TV SoundConnect (SoundShare)
●
function is supported by some Samsung
TVs released from 2012 on. Check
whether your TV supports the TV
SoundConnect (SoundShare) function
before you begin. (For further information,
refer to the TV's user manual.)
If your Samsung TV was released before
●
2014, check the SoundShare setting menu.
Connect
If the distance between the TV and
●
Soundbar exceeds 16.25 ft. (5m), the
connection may not be stable or the audio
may stutter. If this occurs, relocate the TV
or Soundbar so that they are within
operational range, and then re-establish
the TV SoundConnect connection.
TV SoundConnect Operational Ranges:
●
- Recommended pairing range: within
- Recommended operational range:
The Play/Pause, Next, Prev buttons are
●
not operable in TV SoundConnect mode.
▶ Using the Bluetooth POWER On
function
The Bluetooth POWER On function is available after
you have successfully connected the Soundbar to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON,
turning the connected TV on or off will turn the
Soundbar's power on and off as well.
1. Connect the TV to your Soundbar using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
Soundbar remote. The Green or Red
and Green
display.
Green
●
when you turn the TV on or off.
Red
●
you turn the TV off.
This function is supported by some
●
Samsung TVs released from 2013 on.
19
FUNCTIONS
20 inches (within 50cm)
within 16.25 ft. (5m)
LEDs appear on the Soundbar's
: The Soundbar turns on and off
: The Soundbar only turns off when
, ,