Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Decor Connections FP551500SA
- Page 1 FP551500SA ELECTRIC FIREBOX INSERT ASSEMBLY INSTRUCTION...
- Page 2 ELECTRIC FIREBOX INSERT USER’S OPERATING MANUAL CONSUMER SAFETY INFORMATION PLEASE READ THIS MANUAL BEFORE INSTALLING AND OPERATING THIS APPLIANCE WARNING!!! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRIC SHOCK OR FIRE MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS NEAR THIS APPLIANCE.
- Page 3 IMPORTANT OPERATING AND SAFETY INFORMATION When using electrical appliances, the following basic precautions should always be followed to reduce the risk of fire, electric shock, and injury. Read all instructions before using this heater. • Use this heater only as described in this manual. Any other use not recommended by the •...
-
Page 4: Installation Instructions
HELPFUL ADVICE FOR INSTALLING FIREBOX INTO MANTEL 1. These instructions are provided in an easy to follow style. Simply follow the instructions in to properly install unit. 2. Please retain all packaging until you have checked and counted all parts against the parts list. 3. -
Page 5: Operating Instructions
OPERATING INSTRUCTIONS CONTROL PANEL OPERATING PROCEDURES Control panel on the front unit Flip down the front grill panel to reveal control panel 1．1 1. Adjustable Thermostat 2．On/Off Heater button 3．On/Off Main power button 4．Adjustable Flame Brightness Flame Operation: To turn on the Flame Effect of your fireplace, push the power button To adjust the Flame Effect, turn the brightness Knob until it reaches your desired brightness. - Page 6 REMOTE CONTROL OPERATING PROCEDURES l Ensure that the button is in the ON position on the control panel. Ensure that the heater button is in the ON position(if heating is required). l l The effective range of the remote control is up to 6 meters or 19.69 feet. l...
- Page 7 TROUBLESHOOTING Problem Cause Solution Turn on the main power supply Main power supply switch is off. switch. Too many appliances on this circuit Circuit breaker has tripped. be sure that electrical supply for this unit is an individual circuit. Heater is unplugged from wall Plug the cord into an outlet.
- Page 8 Problem Cause Solution Flame adjusting knob is at low Turn the knob to maximum setting. setting. Heater is on but no flame or low flame intensity. Loose wiring at the wall power Contact a qualified electrician. outlet. Check wiring loose Loose wiring at the wall power connections.
Need help?
Do you have a question about the FP551500SA and is the answer not in the manual?
Questions and answers