Italian Design HLF 2600 Instruction Manual
  1. Manuals
  2. Brands
  3. Italian Design Manuals
  4. Coffee Maker
  5. HLF 2600
  6. Instruction manual

Italian Design HLF 2600 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
HLF 2600
ENGLISH
Part Code: 9BIMHL239
HLF Italian Design
1
I.M. HLF 2600 Eng V6-2010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HLF 2600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Italian Design HLF 2600

  • Page 1 INSTRUCTION MANUAL HLF 2600 ENGLISH Part Code: 9BIMHL239 HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 2 These Operating Instructions must be read and applied by anyone performing work with or on the equipment described. In particular, it is imperative that all such persons familiarise themselves with the safety instructions. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 3: Table Of Contents

    2.1.2 Where warning symbols are located…………………….……… 13 2.1.3 Safety information in this Instructions Manual…………………. 13 2.2 Basic safety instructions……………………………………………………. 14 2.2.1 Proper use…………………………………………………………. 14 2.2.1.1 General………..…………….…………………………… 14 2.2.1.2 Proper use of HLF 2600 coffee maker……………….. 14 HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 4 TABLE OF CONTENTS 2.2.2 Specific hazards and instructions…………………….…………. 15 2.2.2.1 Specific hazards and instructions HLF 2600 coffee maker ……………….…………………………… 15 3. Installation ...............………………….…… 18 3.1 Transport …………………………………………………………………..18 3.1.1 Receiving the unit……………………………………………...…. 18 3.1.2 Un-packing ..........……………………… 18 3.1.3 Checking the internal of the unit .......…..….…. 19 3.1.4 Electric connections .........…………….………..
  • Page 5 9 Guarantee, consumables, spare parts, ordering procedure…….….……….. 64 9.1 Guarantee………………………………………………………..………….. 64 9.2 Consumables, spare parts, ordering procedure…………………………. 65 10. Troubleshooting……………..………………………………………………..…. 66 10.1 Checklist for fault diagnosis and troubleshooting………………………. 66 11. Software Table …………….…………………………………..……………….…. 68 HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 6: Description

    5 – Steam wand 6 – Front door 7 – Liquid crystal display (LCD) 8 – Drink selection buttons 9 – Selection’s panel frame 10 – Cup station 11 – Cup holder grid HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 7 DESCRIPTION 12 – Ventilation grid 13 – Modem connection hole and Water line connection kit hole 14 – Back Panel 15 – Main switch 16 – Inlet plug for power cord HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 8: Internal Description

    12 – Right side panel security microswitch 13 – Coffee grinder adjuster 14 – Coffee group 15 – Coffee ground container 16 – Milk frothier 17 – Steam wand connection tube (Optional) HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 9: Introduction

    1.2 Introduction 1.2.1 The HLF 2600 coffee maker The HLF 2600 coffee maker is a fully automatic coffee maker machine, which, in the basic version, can dispense pre-programmed coffee products through a height-adjust- able product outlet into the container. The beverage required is selected via eight beverage selection buttons.

  • Page 10: Coffee Splitter" Optional

    HLF S.r.l. Via Nobel, 10 31050 Villorba Treviso - ITALY Model : Code : Electrical Serial N.: Marks Date: Water Pressure: 0,1 to 0.6 Mpa Max HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 11: Environmental Conditions

    • 100 mm from the back panel to allow ventilation. • 300 mm from the right side to allow the fresh milk operations. NOTE The machine must be placed in vertical position for a correct operation. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 12: Safety Instructions

    • Warning of heat which could lead to injuries. • Allow hot surfaces and components to cool before carrying out any work on these component parts. • If necessary, wear heat-resistant gloves. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 13: Where Warning Symbols Are Located

    Depending on the type of danger, instead of STOP, one of the following symbols could be combined with the word WARNING. WARNING • Warning of electric shock. WARNING • Warning of heat. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 14: Basic Safety Instructions

    2.2.1.2 Proper use of HLF 2600 coffee maker The HLF 2600 coffee maker is used solely to dispense coffee products, coffee and milk combined products, hot water, steam and to heat and froth milk. No other use of the HLF 2600 coffee maker will be deemed to be proper.

  • Page 15: Specific Hazards And Instructions

    WARNING • Never insert either the hands or any rod-shaped object into a bean hopper when the HLF 2600 coffee maker is connected to the mains power supply. • Only coffee beans may be introduced into the bean hopper. • The machine must be located in places where authorized personnel can check it in every moment.
  • Page 16 • Only operate the HLF 2600 coffee maker in covered locations, avoiding places where there is a risk of water splash. There is a risk of damage. • Never spray the HLF 2600 coffee maker with a water hose during cleaning. There is a risk of damage.
  • Page 17 Replace any lost or defective warning symbols immediately. WARNING Never operate the equipment in a damaged condition. Report any irregularities to your superior immediately, especially if they affect safety. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 18: Installation

    • Exposing it to rain, excessive cold or heat, or damp places 3.1.1 Receiving the unit NOTE Before to open the box of the HLF 2600 coffee maker, check out the packaging to be sure there is no damage. If damage is noticed, place a claim with the freight forwarder immediately.

  • Page 19: Checking The Internal Of The Unit

    WARNING Don’t try to operate the HLF 2600 coffee maker in case of presence of internal damages. Even if the damages are minimal, it’s strongly recommended to leave the unit disconnected from the power supply and call the technical service.

  • Page 20: Electric Connections

    Refer to paragraph 1.3.3 of this Instruction Manual to select the right wall plug. WARNING THE USE OF EXTENSION CORDS, ADAPTERS AND/OR MULTIPLE PLUGS IS STRONGLY FORBIDDEN ! HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 21: Start Up And Operation Mode

    On the left side of the machine, its visible a clear tube that goes into a white water tank. Pull up the clear tube together with the round cap from the tank. Then pull out the water tank and fill it with fresh water. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 22: Loading Products

    It’s recommended to use a mix of coffee beans for automatic coffee makers, to increase the life of the grinder’s blades and also to get the best performance for the HLF 2600 coffee maker. For information refer to a coffee beans dealer.

  • Page 23: Turning On The Unit

    INSTALLATION 3.2.4 Turning ON the unit Turn on the unit by the main switch situated on the back of the HLF 2600 coffee maker. The message Searching Coffee Group Position will appear on the LCD display, and the coffee group gear-motor will start running.
  • Page 24 INSTALLATION Hold Red Button To do that is necessary to open the front door, but the HLF 2600 coffee maker has mounted on the front and side door, micro-switches able to detect the opening of the doors. When the door micro-switch is activated the computer board of the machine turn OFF the drink selection panel, avoiding in this way any accidental starts of those mechanical parts that can provide serious injuries to the operator.
  • Page 25 3 seconds and then back ON to reset the computer C A U T I O N Check Water Then re-start the cleaning cycle process, by pushing the CLEANING button again. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 26: Initial Heating

    Close the front door and place your cup on the cup holder of the drip tray. 3.2.7 Adjusting the Coffee Grinder At this point of the initial start up, the HLF 2600 coffee maker is ready to dispense the first beverage and the factory recommend to start making a coffee in order to adjust the grinder’s blades.
  • Page 27 Each operator can put its own coffee beans into the HLF 2600 coffee maker, therefore the factory ship all the machines with the blades open to prevent any damage.

  • Page 28: Closing The Grinder's Blades

    Before to start a new drink remove the right side panel as showed in the picture below. Slide the panel upwards [1] and leave it off [2]. Move the blades adjuster to the negative direction of one “click” as showed on the picture below. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 29: Opening The Grinder's Blades

    Pay attention that the panel is firmly inserted in its place. 3.2.7.2 Opening the grinder’s blades If during the lifetime of the HLF 2600 coffee maker the operator changes the type of coffee normally used, it will be necessary to open the blades of the grinder and repeat the process illustrated at the paragraph 3.2.6.

  • Page 30: Frothing The Milk

    With the door open, place the cup into the cup station and push the cappuccino button. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 31: Changing The Drink Selection Panel

    Given that the function of each drink button can be changed in the way to make different drinks from the original factory setting, the selection panel can be printed out from a regular colour printer, and installed into the front door. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 32: Getting A Customized Selection Panel

    Using a screw-driver, lose the two screws that hold the selection’s panel frame as showed on the picture below: Leave off the frame and insert from the lower side the selection panel as showed in the following picture. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 33: Fixing The Top Lid

    Place back the top lid on its position. Using the screws supplied, fix it as showed in the following picture. Now it’s possible to open the top lid without leaving it off completely. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 34: Daily Cleaning Guide

    Do not use hot water for the cleaning process. Follow exclusively the instructions for cleaning described in this chapter. Otherwise warranty will not be valid. • Place an empty carafe under the drink dispenser point. HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 35 Due to the easy bacteria grow of the fresh milk; it’s strongly recommended to repeat this cleaning process after finishing to use the milk frothier. • Turn OFF the HLF 2600 coffee maker. • Open the front door. • Take off/open the top lid.
  • Page 36 • Fill water container. Wipe exterior and dry. Return water container to unit, lay down lid and water tube. • Wipe outside of unit with sponge. Dry. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 37: How To Remove And Clean The Milk Frothier (Once A Week)

    CLEANING GUIDE • Put back the top lid and close the front door. • Turn back ON the HLF 2600 coffee maker. 4.3 How to remove and clean the milk frothier (Once a week) Open the front door and the top lid. Disconnect the clear tubes of the milk frothier as showed in the picture below: 1- Disconnect the milk frothing regulator tube.

  • Page 38: How To Remove And Clean The Coffee Group (Once A Month)

    4.4 How to remove and clean the coffee group (Once a month) The coffee group is located on the right side of the HLF 2600 coffee maker. It creates the espresso coffee by compressing the ground coffee beans into a “puck” and forcing the water to go through this “puck”...

  • Page 39: Cleaning Conclusion

    CLEANING GUIDE 4.5 Cleaning conclusion These operations must be carried out when the HLF 2600 coffee maker is turned OFF and open. Cleaning operations must be carried out before the products are loaded. WARNING Always disconnect the power before filling or cleaning operations interventions.
  • Page 40 This process is necessary to clean and de-scale the internal hydraulic circuits of the machine and preserve the machine from calcification build. Clean the machine using the de-scaling product provided by HLF Italian Design when the message C A U T I O N Descaling/Filter appears on the LCD display or when the de-scaling process is necessary (refer to paragraph 5.3.2 for the setting of this function).
  • Page 41 CLEANING GUIDE CAUTION Do not use hot water for the de-scaling process. Follow exclusively the instructions for cleaning described in this chapter. Otherwise warranty will not be valid. HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 42 17. At this point the descaling program is end. Put into their original position all the tubes, coffee group and right side panel. Close the machine. CAUTION Once the cleaning cycles are finished REMOVE the switch locker from the HLF 2600 coffee maker. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 43: Operating The Computer Software

    Each time you press the button, the “dot” showed on the LCD display will change to an equal sign. After have pushed the number 1 for four times, push again one more time to gain into the operating software of the HLF 2600 coffee maker. 5.2 Programming Steps Gain into the software as described on previous paragraph 5.1.
  • Page 44 Button 3 serves to access into the menu once it appears on the LCD display. Button 3 is also used to confirm the changes done and to move a step forward. HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 45 P R O G R A M Password Drink Counters Function P R O G R A M P R O G R A M Cash Service Index=0 P R O G R A M Beep Tome=0,3 HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 46: Programming Menu

    0. This identifies the amount of money in the cash box. P R O G R A M Cash NOTE This function is used only on machines that have payment systems attached. HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 47 X will appear on the LCD display. P R O G R A M Archive This identifies the accumulated total drinks served since the HLF 2600 coffee maker has been installed. NOTE This number cannot be reset to “zero” or changed.

  • Page 48: Function

    5.3.2 Function This menu is used to set the generic functions of the HLF 2600 coffee maker. Push button 1 or 2 till the display shows P R O G R A M Function. P R O G R A M Function The message P R O G R A M Service Index=X will appear on the LCD display.
  • Page 49 Push button 3, the message P R O G R A M Stop if filter = N will appear on the LCD P R O G R A M Stop if filter = N This function permits to hold the distributor if the message “Decal/ Filter H2O” appear on the LCD Display HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 50 By pushing button 3 the message P R O G R A M Ground Draw. ON=Y will appear on the LCD display. P R O G R A M Ground Draw. ON=Y HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 51 1 or 2 it’s possible to change between Eng, Ita or Deu. Choose the language and press key 3 to confirm. At this point the menu Function is finished. Push button 5 to quit and go to the next menu. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 52: Drink Number 1

    NO. If the purpose is to froth the milk with a nice foam, set this function to YES. Push button 3, the message P R O G R A M Del. Froth = X.Xs will appear on the LCD display. HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 53 1 when the pre-selection button Extra Long will be pushed before to push the Drink 1 button. All the amounts saved in this menu will be increase according with this percentage. HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 54 By pushing button 3 the message P R O G R A M Best Coffee Y will appear on the LCD display. P R O G R A M Best Coffee HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 55 By pushing again button 3, the message P R O G R A M N° of Jugs X will appear on the LCD display. P R O G R A M N° of Jugs X HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 56 1 or 2 is possible to change in YES or NO. Choosing YES, the coffee will be dispensed before the milk, by choosing no, the coffee will be dispensed after the milk. HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 57 Push key 3 and the message P R O G R A M Fix.Pre-S=None will appear on the LCD display. P R O G R A M Fix.Pre-S=None HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 58: Preselection Key

    From the factory the HLF 2600 coffee maker comes with a setting inside the memory, which assigns a type of drink to each button, but this setting can be change at any time to please the requirements of the user.
  • Page 59 Each change has to be confirmed by pushing button 3, which is going also to switch to the next pre-selection button. After the three pre-selection buttons, menu PreSelection Key is finished. Push button 5 to quit and go to the next menu HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 60: Password

    This menu is used to change the password that is request to gain into the software of the HLF 2600 coffee maker. Push button 1 or 2 till the message P R O G R A M Change Password will appear on the LCD display.

  • Page 61: Daily Maintenance Check List

    6.1 Check list This check list is the summary of the operations to do on a daily base to maintain the HLF 2600 coffee maker in a perfect state ready to be used: Bean hopper filled with coffee beans Coffee grounds container emptied and cleaned...

  • Page 62: Inactivity

    In case of long inactivity of the coffee machine it is necessary to carry out certain preventive operations: Turn OFF the HLF 2600 coffee maker. Disconnect the power cord from the wall plug. Empty coffee beans from the coffee beans hopper.

  • Page 63: Disposal

    • Empty coffee grounds container. • Empty water tank (if used). • Take the equipment apart. • Recycle individual parts according to material type. • Dispose of non-recyclable materials according to type. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 64: Guarantee, Consumables, Spare Parts, Ordering Procedure

    To validate the guarantee claim the defective part must be returned to the manufacturer. After inspecting the returned part the manufacturer reserves the right to reject a guarantee claim if one of the conditions referred to above exists. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 65: Consumables, Spare Parts, Ordering Procedure

    The manufacturer rejects any liability for the situation in which it is found that non device-specific spare parts have been installed in the respective machine. HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 66: Troubleshooting

    1. It’s programmed to do 1. Need a descaling process. Descaling/Filter a descaling process (Ref. to paragraph 4.6) 2. It’s programmed to 2. Contact the Service and change the descaling Support for replacement filter HLF Italian Design I.M. HLF 2600 Eng V6-2010...
  • Page 67 C A U T I O N The main computer board Contact the Service and Serial Time Out on the back of the Support machine is not in connection with the front door computer board HLF Italian Design I.M. HLF 2600 Eng V6-2010...

  • Page 68: Software Table

    SOFTWARE TABLE 11. Software Table HLF Italian Design I.M. HLF 2600 Eng V6-2010...

Table of Contents