Mazda 2012 2 Owner's Manual page 33

Essential Safety Equipment
Seat Belt Systems
NOTE
The warning light flashes and a beep sound
l
will be heard for about 6 seconds if the
driver's seat belt is not fastened when the
ignition is switched ON.
If a driver or front passenger's seat belt is
l
unfastened after the beep sound turns off
(warning light remains illuminated), and
the vehicle speed exceeds 20 km/h (12
mph), the warning light flashes and beep
sound activates again.
Placing heavy items on the front passenger
l
seat may cause the front passenger seat belt
warning function to operate depending on
the weight of the item.
To allow the front passenger seat weight
l
sensor to function properly, do not place
and sit on an additional seat cushion on the
front passenger seat. The sensor may not
function properly because the additional
seat cushion could cause sensor
interference.
When a small child sits on the front
l
passenger seat, it is possible that the
warning light will not operate.
2-20