Table of Contents
Advertisement
Installation
How to connect
Connect the audio and video cables from the external
equipment's
output jacks to the TV input jacks, as shown in
the figure.
When connecting the TV to external equipment,
match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source by using the TVNIDEO
button on
the remote control. (If connected to A/V INPUT 1, select
Video 1 input source).
2. Operate the corresponding
external equipment.
Refer to
external equipment operating guide.
Z
]._
Camcorder
Video Game Set
How to connect
1. Connect the DVD video outputs (Y, PB, PR) to the COMPONENT
(Y, PB, PR) INPUT jacks
on the TV and connect the DVD audio
outputs to the AUDIO INPUT jacks on the TV, as shown in the fig-
ure.
2. If your DVD only has an S-Video output jack, connect this to the
S-VIDEO input on the TV and connect the DVD audio outputs to
the AUDIO INPUT jacks on the TV, as shown in the figure.
NOTE: If your DVD player does not have component
video output,
use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TVNIDEO
or MULTIMEDIA
button on the remote control
to select Component
1 or Component
2. (If connected to S-
VIDEO, select the Video 1 or Video 2 external input source.)
3. Refer to the DVD player's manual for operating instructions.
Component
Input ports
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
Component
ports
on the TV
im iiii ii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii_iii
i
Video output ports
on DVD player
or
DVD
14 Plasma TV
Advertisement
Table of Contents
