Tenda UH150 User Manual page 75

Tenda Wireless Network Adapter User Guide
Q3: Failed to enable ICS.
A3: Microsoft ICS service can only combine one group of WAN and
LAN. This message indicates ICS may have been enabled by other
network adapters.
1.Please manually cancel or restart and cancel ICS, then re-switch to
AP mode.
2. This dialogue box appears because virtual wi-fi miniport adapter
can only be used by one wireless network adapter at a time. Please
disable any other non-Tenda wireless network adapters and re-switch
to AP mode.
Q4: Under Windows 7,when I switch from station mode to AP
mode ,the screen flashes " Disabling ICS ， please wait ... ... " and
immediately return to station screen.
A4: This is because you have disabled " Microsoft Virtual WiFi
Miniport Adapter",please re-enable it and then switch to AP mode.
Q5:Client cannot obtain IP when connected to soft AP of the wireless
network adapter.
A5:Manually set an IP address at the same net segment as that of the
AP and the gateway and DNS at the IP address of AP.Thus,
communication can be achieved.
Q6: The SSID is not fully displayed on the wireless network list, what
should I do?
A6: Keep the mouse on the displayed SSID for about 2 seconds, as
-73-