Chapter Three: Window User Interface; Editing Area - Penpower Technology EZ Handwriter User Manual

Chapter Three: Window User Interface

EZ Handwriter provides Balloon and Window Interface. Window User Interface
provides full screen writing and writing pad environment. When you select the Window
UI from "Setting/Interface", you will see the user interface below. You can write
anywhere on the screen directly, the recognized characters are sent to the cursor location.

Editing Area

Move Toolbar
Candidates
Open/Close FBSI Area
Tips:
1. You can click the Menu
select Window UI. Please refer to 4.2.4 for details.
2. If the system recognizes the character before you finish writing very often, you can adjust the
Writing Speed.
3. If you have minimized the Toolbar, you can click with the pen on a blank area. The Toolbar
will show up automatically.
3.1 Editing Area
After writing on the screen, the recognized characters are sent to the cursor location.
The recognized characters are also reserved in the Editing Area for editing quickly.
Tip: If you write more than one character at once, you can click any recognized character from
the Editing Area to edit or re-write.
Note: If you do not want to edit or re-write the selected character, you may need to click the blank
area to continue writing.
Function Buttons
Editing Buttons Editing Buttons
(for Editing Area) (for cursor location)
Open/Close Writing Pad
button, and go to Setting/Interface/Switch display interface to
Chapter Three: Window Interface
Minimum
Close Program
3-1