Acura 2015 RLX Owner's Manual page 72

Indicator Name
Malfunction
Indicator Lamp
Charging
System
Indicator
*1:On the left: Models with navigation system
On the right: Models without navigation system
On/Blinking
Comes on when you set the power
●
mode to ON, and goes off either
when the engine starts or after
several seconds if the engine did not
start. If "readiness codes" have not
been set, it blinks five times before it
goes off.
Comes on if there is a problem with
●
the emissions control system.
Blinks when a misfire in the engine's
●
cylinders is detected.
Comes on when you set the power
●
mode to ON, and goes off when the
engine starts.
Comes on when the battery is not
●
charging.
Explanation
Readiness codes are part of the on
●
board diagnostics for the emissions
control systems.
2 Testing of Readiness Codes P. 503
Comes on while driving - Have the
●
vehicle checked by a dealer.
Blinks while driving - Stop in a safe
●
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take the vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 484
Comes on while driving - Turn off the
●
climate control system and rear
defogger in order to reduce electricity
consumption.
2 If the Charging System Indicator
Comes On P. 483
I n f o r ma t i o n P r o v i d e d b y :
uuIndicatorsu
Message *1
Continued 71