Dvd Setup - LG 42PX7DC Owner's Manual

DVD Setup

DVD Setup
or
(R) AUDIO (L)
S-VIDEO
DVD
When supporting HDMI
INTERFACE INTERFACE
HDMI-DVD OUTPUT
(R) AUDIO (L)
B R
• Component Input ports
SERVICE ONLY
1 1
OPTICAL OPTICAL
DVD
How to connect
1. Connect the DVD video outputs (Y, P
NENT (Y, P , P ) INPUT jacks on the TV and connect the
B R
DVD audio outputs to the AUDIO INPUT jacks on the TV, as
shown in the figure.
2. If your DVD only has an S-Video output jack, connect this to
the S-VIDEO input on the TV and connect the DVD audio out-
puts to the AUDIO INPUT jacks on the TV, as shown in the
figure.
Note: If your DVD player does not have component AV out, use
S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the INPUT button on the remote control to select
Component . (If connected to S-VIDEO, select the AV1 or
AV2 external input source.)
3. Refer to the DVD player's manual for operating instructions.
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
Component ports
on the TV
Video output ports
on DVD player
1. Connect the HDMI output of the DVD to the HDMI1/DVI
IN jack on the set.
2. Select HDMI1/DVI or HDMI2 input source with using the
INPUT button on the remote control.
3. Refer to the DVD player's manual for operating instruc-
tions.
• TV can receive the video and audio signal simulta-
neously with using a HDMI cable.
• If the DVD supports Auto HDMI function, the DVD
output resolution will be automatically set to
1280x720p.
• If the DVD does not support Auto HDMI, you need
to set the output resolution appropriately. To get the
best picture quality, adjust the output resolution of
the DVD to 1280x720p.
, P ) to the COMPO-
B R
P
Y P
B R
Pr
Y Pb
Y B-Y R-Y
Cr
Y Cb
P
Y P
R
B
Owner's Manual 15