BMW K 1300 S Rider's Manual page 100

8
98
Front brake fluid level
Brake fluid (DOT4)
z
The brake fluid level must
not fall below the MIN mark.
(Brake fluid reservoir hor-
izontal, motorcycle stand-
ing upright and handlebars
straight ahead)
If brake fluid level falls below the
approved level:
Have the defect corrected as
soon as possible by a special-
ist service facility, preferably an
authorized BMW Motorrad re-
tailer.
Replacing screen insert
Possible loss of stopping
power at front brake.
Screen insert in the front brake-
fluid reservoir always has to be
replaced on completion of work
that affects the level of fluid
in the front braking circuit (for
example replacing brake pads
or changing brake fluid). Please
contact a specialized workshop
for this purpose, preferably an
authorized BMW Motorrad
retailer.
Checking rear brake fluid
level
Make sure ground is level and
firm and hold motorcycle verti-
cally.
with center stand Generation
OA
II
Make sure ground is level and
firm and place motorcycle on
its center stand.
A low fluid level in the
brake reservoir can allow air
to penetrate the brake system.
This significantly reduces braking
efficiency.