Manual www.industrisal-needs.com Table Of Contents Initial operation ......................2 Safety Precautions ......................2 Specified Application .....................3 Operation mechanism ....................4 How to set up the device....................4 Detailed description and operation procedure .............5 Turn on device ...........................6 Start operation ...........................6 Select operation time .........................6 Select performance level of air fan .....................6 Shut down operation program ....................6 Initiation .........................6...
Manual www.industrial-needs.com Initial operation The ozone generators of the XT-series follow the latest standards of today’s technology and thereby fit European and international guidelines. The relevant information, declarations and data is deposited. In order to assure a long lifetime, optimized function and a hazard-free operation with the device, we urge you to read the following instructions and to follow them.
Manual www.industrisal-needs.com Do not operate with the device as long as the enclosure is missing or as long as there are errors in its construction. The device features an air blower with an air filter. The inlet and outlet of the device must be kept clear and may not be blocked under any circumstances.
Manual www.industrial-needs.com Operation mechanism The device is a high-performance ozone generator designed to neutralize smells and to disinfect the air. Ozone is the strongest oxidant used for disinfection. It reacts quickly with most of organic substances. Therefore the relevant molecules are split. Thus it demolishes smells in kitchens, of fustiness, urine and others, such as cigarette and burning smell.
Manual www.industrisal-needs.com Detailed description and operation procedure The ozone air cleaners of the XT-series can be controlled easily with the IR remote controlled, that is included in delivery, or with the control panel on the device. The device features at the front (right side) a control panel with several buttons to program the operation modes.
Manual www.industrial-needs.com Turn on device Press main “POWER”- button at the front of device. The LED above that button will be red. Now the device operates in standby mode and can be programmed via its remote control (advised) or its control panel.
Manual www.industrisal-needs.com Tips on determining the operation period The treatment time depends on various factors, e.g.: Type of smell Intensity of smell Size of the room and temperature Time and intensity of impact Composition of the material and source of smell ...
Manual www.industrisal-needs.com Follow these steps to clean the device: a. Pull the power plug of the device and open the silver cover at the front to clean out the Plasma discharge electrode. b. Underneath there is the plasma discharge electrode. The plasma plate does not necessarily need to be demounted for cleaning.
Manual www.industrial-needs.com 14 Disposal Device may not be thrown into household waste. It has to be given in a specialised disposal company. NOTE: "This instrument doesn’t have ATEX protection, so it should not be used in potentially explosive atmospheres (powder, flammable gases)." Please contact PCE Instruments if you have any questions concerning our products, service etc.
Need help?
Do you have a question about the XT - series and is the answer not in the manual?
Questions and answers