iLike BM-886 Operation Manual

BM 886 Bluetooth headset operations manual
This product is made by an advanced Bluetooth wireless technology and ergonomic design
understanding of the operations of the product, please read the following instructions carefully.
Range of use：
1. In compliance with Bluetooth enabled cellphone, enjoys the music and answers phone calls wirelessly
2. Pairing with PC（built in Bluetooth function or with USB dongle for Bluetooth）, listening the music from internet.
2. Pairing with PC（built in Bluetooth function or with USB dongle for Bluetooth）enjoying the web chatting
(supporting with ICQ, MSN, SKYPE and etc.)
3. In compliance with IPAD\ MID, compatible for streaming music
4. LINE IN
S4: ON/OFF, pairing, Answer/hang up /reject the call and last number redial
S3: Play/Pause, switch microphone
S1: Next song, volume up
S2: Previous song, volume down
Ⅱ.Charging
This product is with built-in rechargeable battery， however, this headset battery is not fully powered. Before you
use the headset for the first time, please charge it at least 4 hours. After that，charging would be taken approximately
2-3 hours. When the LED turns red, charging is carried on; whereas the LED red lights off, charging is completed.
Ⅲ.Pairing
Before you use the Bluetooth headset with mobile phone, pair it with mobile phone.
1. Long press S4 button about 5 seconds. When your headset LED will flash the red and blue alternately, ceased to
press the button. The Headset emits "connected "sound , then the headset had been entered into the pairing mode.
2. Search the Bluetooth headset on your mobile phone (please study the user manual of your mobile phone); after
the search, your phone should indicate that it has found the "BM-886" on the list.
3. Select BM-886 on the list, pairing with your mobile phone. When the headset is paired with your mobile phone,
the headset emits a "connected " sound, blue light turns into flash slowly at about once per 2. seconds.
Attention:
When pairing with your mobile phone，some mobile phone models required to input a pairing code，please
.
For better