Pip (Picture-In-Picture) Feature; Watching Pip; Programme Selection For Sub Picture; Selecting An Input Signal Source For The Pip - LG 141K TX) Owner's Manual

Operation
PIP (Picture-in-Picture) Feature
PIP (Picture-in-Picture) Feature
- PIP lets you view 2 different inputs (sources) on your set screen at the same time.
- It's not available to use this function in TELETEXT mode.

Watching PIP

Press the PIP button to show the sub picture.
• Each press of PIP button changes the screen display as shown below.
Note :
a. When the sub picture size is 1/2 of the main picture, the picture quality may decrease.
b. The motion of the sub picture can be unnatural because the set displays full screen by synchronizing the main picture source when the
refresh rate between the main picture source and the sub picture source is different in PIP mode.

Programme Selection for Sub Picture

Press the PIP PR + /- button to select a programme for the sub
picture.

Selecting an Input Signal Source for the PIP

Press the PIP INPUT button
to select the input source for
the sub picture.
In some models, when the
sub picture quality get poor
for sub picture, select Auto,
PAL, SECAM or NTSC in
PIP System menu.

POP (Picture-out-of-Picture: Channel Scan)

Use POP to search the programmes of all the memorized chan-
nels one-by-one on the 3 PIP screen display, (while the main
picture source remains the current channel). The pictures of all
the programmed channels are searched with the 3 POP screen.

Adjusting PIP Transparency (PIP mode only)

1. Press the MENU button and then
PIP/DW menu.
2. Press the G G button and then
.
Transparency
3. Press the G G button and then
transparency.
4. Press the EXIT button to return to normal TV viewing.
22 PLASMA TV
RGB
AV1
10:30
RGB
10:30
RGB
AV1
10:30
button to select the
D D / E E
button to select PIP
D D / E E
button to adjust PIP
F F / G G
RGB
AV1
10:30
RGB
AV1
10:30

Moving the PIP (PIP mode only)

Press the POSITION button.
Repeatedly press the
D D / E E
or / button until desired
F F G G
position is achieved. The sub
picture moves up/down or
left/right.

Picture Size

Press the SIZE button and
then F F / G G button to adjust
the sub picture size.
With SIZE button in DW1,
DW2 modes, main and sub
picture is adjusted simultane-
ously. With SIZE button in PIP
mode, sub picture is adjusted.

Adjusting the screen for the PIP

- In TV or AV modes for the main picture and RGB[PC] for
the sub picture, you can use Auto config and Manual config
to adjust the screen of the sub picture.
- In TV or AV modes for main picture and HDMI[DTV] or
Component 480p, 576p, 720p, 1080i for the sub picture,
you can use Manual config to adjust the screen of the sub
picture.
RGB
AV1
10:30
Win. position
D D
F F G G
E E
Win. size
F F G G