1. Manuals
  2. Brands
  3. Viza Manuals
  4. Scooter
  5. V2
  6. Owner's manual

Viza V2 Owner's Manual

Hide thumbs

Advertisement

Table of Contents

OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Viza V2

  • Page 1 OWNER’S MANUAL...

  • Page 2: General Safety Precautions

    If you have any questions as to the operating conditions of your Viza scooter, turn off the engine and walk your scooter. Viza scooters should not be ridden by persons without excellent vision, balance, coordination, reflex muscle tone, strength, and good decision making capability.
  • Page 3 Follow inspection and maintenance procedures and schedules described in this manual. • Never operate your Viza scooter on steep hills or inclines. • Do not turn at excessive speeds. • Maintain proper tire pressure as described in this manual.

  • Page 4: Tools Required

    ASSEMBLY OF FRONT WHEEL TOOLS REQUIRED 15mm open wrench, 15mm socket wrench or an adjustable wrench. 1. Align front wheel assembly so that the disc brake rotor is on the same side as the disc brake caliper mounted to the front fork.

  • Page 5: Disc Brakes

    Do not touch the disc when it is hot! The brake pads in the brake caliper assembly is easily replaceable when they wear out. In- quire about parts with your local Viza dealer. There is a gap adjustment knob located on the tire side of the brake caliper unit.

  • Page 6: Control & Function

    CONTROL & FUNCTION HANDLE BARS • Brake cable adjustments • Front brake lever • Rear brake lever • Throttle grip: Turn toward rider for higher speed • Throttle cable adjustment SEAT • Seat adjustment: Adjust seat setting angle and tighten firmly. •...
  • Page 7 QR lever and adjust the QR fixing nut until the QR tightens tightly with the lever in the fully closed position while still al- lowing the hinge to be folded. KICK-STAND Make sure to correctly fold kick stand in before riding your Viza scooter.

  • Page 8: Fuel And Oil

    • Use guage bottle to measure proper oil mixture. • For a perfect mix every time, use Viza oil packets available at your Viza dealer. STARTING THE ENGINE 1. To start a cold engine, move the choke lever to the CLOSED position.

  • Page 9: Drive Belts

    NEW ENGINE BREAK-IN PERIOD The engine on your new Viza™ scooter must be gradually broken-in to assure engine longevity. For the first 2 hours of use (or 1 gas tank of fuel), do not accelerate abruptly or operate at high engine speeds. Vary the throttle input up and down while riding to correctly break-in your engine.
  • Page 10 Viza™ scooter to lean too far to either side. • Do not swerve or turn your Viza™ scooter at high speeds because you risk the possibility of a fall. • Driving at a lower r.p.m. will decrease noise as well as vibration and increase the joy of riding.
  • Page 11 You may also walk or ride your Viza™ without the engine running just as you would ride a non-motorized...

  • Page 12: Daily Check

    MAINTAINANCE SCHEDULE DAILY CHECK • Check all screws, bolts, and fasteners for tightness. • Check brake and throttle cable adjustment. • Tire pressure should be inflated to specifications printed on tire sidewalls of your scooter. Front and rear tires have different specifications. •...

  • Page 13: Storage Procedure

    STORAGE PROCEDURE If you plan to not use your Viza™ scooter for more than a month, it is advisable that you perform the following procedures: • Empty the fuel tank and start engine to completely remove all gasoline. • Remove spark plug and inject a small amount of engine oil (4-5 drops) through spark plug hole and pull starting handle 2-3 times.
  • Page 14 • If water gets in the brake pads or on the brake disc, dehydrate by applying brake softly and briefly while riding. ONLINE SUPPORT — PARTS www.viza.com Please refer to our website for more detailed troubleshooting help and a complete parts list.

  • Page 15: Specifications

    SPECIFICATIONS Length 54 in. Height 41 in. Width 13 in. 21 in. Folded Height Dry Weight 60 lbs. Single cylinder, air-cooled, Engine Type 2-stroke 32.6cc Engine Displacement Horse Power 1.7 @ 7000 rpm Electronic Ignition Carburetion Pumper type w/ choke & primer Fuel Unleaded gasoline Fuel Capacity...
  • Page 16 VIZA MOTORS LLC 7525 E. Williams Drive Scottsdale, Arizona 85255 www.viza.com VIZA™ is a registered trademark of Viza Motors LLC ©2002 Viza Motors LLC - All rights reserved.

Table of Contents

Save PDF