Dell S2415H User Manual page 31

Auto Adjust Even though your computer recognizes your monitor on startup, the
Auto Adjustment function optimizes the display settings for use with
your particular setup.
Auto Adjustment allows the monitor to self-adjust to the incoming
video signal. After using Auto Adjustment, you can further tune your
monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls
under Display menu.
NOTE:
configuration.
NOTE:
analog (VGA) connector.
Input Use the Input Source menu to select between the different video signals
that may be connected to your monitor.
Source
Auto Select Use
sources.
VGA Select the VGA input when you are using the analog (VGA) connector.
Use
HDMI (MHL)
Select the HDMI (MHL) input when you are using the HDMI connector.
Use
In most cases, Auto Adjust produces the best image for your
Auto Adjust option is only available when you are using the
to select Auto Select, the monitor scans for available input
to select the VGA input source.
to select the HDMI (MHL) input source.
Operating the Monitor
31
|