NephSystem Technologies N320 Quick Start Manual

Nephsystem technologies n320 ruggedized pda

Hide thumbs

Table Of Contents

Quick Links

Download this manual

NephSystem Technologies

N320 Ruggedized PDA

Quick Start Guide

v2.2.4

Disclaimer and Limitation of Liability

The content of this manual is for information use only and is subject to change without notice. NephSystem Technologies

assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication. No part of this

manual may be reproduced in any form or by any means, electronic, mechanical, recording, or otherwise, without the

prior written permission of NephSystem Technologies.

NephSystem Technologies products are not designed, intended, authorized or warranted to be suitable for life support

applications or any other life critical applications which could involve potential risk of death, personal injury, property

damage, or environmental damage.

About NephSystem Technologies

NephSystem Technologies is the leading supplier in the fields of RFID, Smart Tracking Systems and Industrial PDAs. It

was established in 1998 and has headquarters in Canada and has offices in the Asian-Pacific region. NephSystem

works with partners around the world to ensure that our customers have the right products and solutions to achieve their

business goals.

We manufacture and distribute a wide variety of industrial embedded products, Wireless communication devices and

related peripherals around the world.

DELTA BC, Canada, V4L 2A6

Tel: +1 604-9489289

Fax: +1 604-9489607

Email:

sales@nephsystem.com

service@nephsystem.com

Table of Contents

Summary of Contents for NephSystem Technologies N320

Page 1 Disclaimer and Limitation of Liability The content of this manual is for information use only and is subject to change without notice. NephSystem Technologies assumes no responsibility or liability for any errors or inaccuracies that may appear in this publication. No part of this manual may be reproduced in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written permission of NephSystem Technologies.
Page 2: Table Of Contents
NephSystem Technologies Content 1. Get Understanding of Your N320 PDA 2. Hardware Connection of N320 3. Power On/Off and Reset Your N320 PDA 4. Getting Started 5. RFID Operation 6. Barcode Identification 7. GPS Operation 8. GPRS Operation 9. Safety & Security Specification...
Page 3: Get Understanding Of Your N320 Pda
NephSystem Technologies 1. Get Understanding of Your N320 PDA The NephSystem Technologies’ N320 PDA package comes with the following components.   Stylus  Mini-USB Cable Battery   RFID sample tags (if the RFID feature is purchased) ...
Page 4 System indicators LCD: 3.2 inch Touch Screen LCD, the resolution is 240 * 320 Keypad Programmable right key Power Button RESET button: can be used to RESET N320 Barcode scanner Stylus holder Speaker USB interface Camera: 1.3 million pixels camera...
Page 5: Hardware Connection Of N320
NephSystem Technologies 2. Hardware Connection of N320 Remove the battery cover Insert a TF or Mini SD card (If it is needed) DELTA BC, Canada, V4L 2A6 Tel: +1 604-9489289 Fax: +1 604-9489607 Email: sales@nephsystem.com service@nephsystem.com...
Page 6 NephSystem Technologies Insert the SIM card Insert the battery Install the battery cover DELTA BC, Canada, V4L 2A6 Tel: +1 604-9489289 Fax: +1 604-9489607 Email: sales@nephsystem.com service@nephsystem.com...
Page 7 NephSystem Technologies Data Communication cable connection Battery Charger Usage DELTA BC, Canada, V4L 2A6 Tel: +1 604-9489289 Fax: +1 604-9489607 Email: sales@nephsystem.com service@nephsystem.com...
Page 8: Power On/Off And Reset Your N320 Pda
NephSystem Technologies 3. Power On/Off and Reset Your PDA Power on: Press and hold the power button for 2 to 3 seconds, the power indicator will light on automatically, and at the same time, the startup picture will be displaying on the screen.
Page 9 Toggle the power button can wake it up. Shut down: When you don't need to use the N320, please press and hold the power button for 2 seconds, the PDA will pop up with a shutdown message window, just click the "Yes" to shut down immediately, at this time the LCD backlight and the power indicator will be off.
Page 10: Getting Started
Refer to the Microsoft website for information on how to use the software. 3. When you connect your N320 to your computer for the first time, the Windows Mobile Device Center should automatically start. 4. Click “Set up your device”.
Page 11: Rfid Operation
Mobile 5.0, and version 4.5 or greater is required to connect to Windows Mobile 6. Users are able to find this ActiveSync from N320’s product CD. When you connect your N320 to your computer for the first time, the New Partnership wizard should automatically pop up.
Page 12 To make a testing for the RFID, please copy the file of “NephSystem_320.cab” from the product CD over to your N320, click on this cab file on the N320, the testing software will be installed properly on the PDA.
Page 13 NephSystem Technologies 125KHz /134.2KHz RFID For 13.56MHz ISOq14443A RFID, the antenna zone is located at the keypad area on the front panel, see the picture below – 13.56MHz RFID DELTA BC, Canada, V4L 2A6 Tel: +1 604-9489289 Fax: +1 604-9489607 Email: sales@nephsystem.com...
Page 14: Barcode Identification
128 code, 93 code, Codabar, etc. To make a testing for the RFID, please copy the file of “NephSystem_320.cab” from the product CD over to your N320, click on this cab file on the N320, the testing software will be installed properly on the PDA.
Page 15: Gps Operation
“VisualGPSceInstall.CAB” from the product CD onto any folder on the PDA. B. Click on the CAB on the N320 for the installation of GPS demo utility. C. Go to “My Device” -> “Programs”, then click “VisualGPSce” D. Click “Connect” from the menu, then choose “Serial Port (Comm Port)”...
Page 16 NephSystem Technologies E. Change the Port to “COM6” F. Select the Baud as “4800”, then press “OK” DELTA BC, Canada, V4L 2A6 Tel: +1 604-9489289 Fax: +1 604-9489607 Email: sales@nephsystem.com service@nephsystem.com...
Page 17 NephSystem Technologies G. Or users are able to use the default GPS testing software which is coming with Windows Mobile 6.5 for testing purpose. To realize that, please got to “Start” -> “Settings” -> “System”, then click on the icon of “GPS Settings”, see the picture below –...
Page 18: Gprs Operation
NephSystem Technologies 8. GPRS Operation To perform a GPRS test, please follow the steps below – A. Go to “Start” -> “Settings” -> “Connections”. B. Then click on the “Connections” icon, on the following screen, choose the “Add a new modem connection”, see pictures below –...
Page 19 NephSystem Technologies C. Name a connection then choose “Next” button. D. In the “Access point name” area, type in the access point which is being used in your GSM/GPRS network, for more information about it, please work with your ISP to find out, and then click “Next”...
Page 20 NephSystem Technologies E. If required, type in the log in information (User name and Password) on the next window, then hit the button of “Finish”. Note: To acquire the log in info, please work with your ISP for details. The GPRS connection will be ready to go. ...
Page 21 NephSystem Technologies 9. Security Specification 9.1 Declaration of Security Specification European Notice Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive (R&TTE) (1999/5/EEC), the Electromagnetic Compatibility Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) – as amended by Directive 93/68/ECC - issued by the Commission of the European Community.
Page 22 NephSystem Technologies  Keep the environment with good ventilation when the charger is supplying power or being charged. Do not use paper or other items to cover the charger which may lead to bad cooling effect. Do not use the charger by putting in the bag.
Page 23 NephSystem Technologies 9.4 About Static Discharging Static discharging may interfere normal operation of electronic equipment. Your device may go abnormal and lead to damage or loss of data. Please reset your device for returning normal. In order to avoid data loss caused by static discharging or other factors, it is suggested that you often save data and make backup regularly.