Operation - MK Controls Lightning Bug Instruction Manual

™
Lightning Bug Instruction Manual

Operation:

The Lightning Bug™ has three 'soft-touch' buttons that are used to operate all of
the features:
On/Off
Decrease Sensitivity
Increase Sensitivity
On/Off: Press and hold this button for approximately 2 seconds turns the
Lightning Bug™ on or off. When the unit is first turned on, it will execute a
Power On Self-Test (POST), which will light up all of the LED's and perform an
internal function verification. If during the POST you notice that any LED's fail
to illuminate, please contact MK Controls Technical Support for troubleshooting
your unit.
Decrease Sensitivity: Tap this button to decrease the sensitivity of the Lightning
Bug™. When this button is pressed, the bargraph display (orange LED's) will be
show the current sensitivity level. There are a total of 26 levels of available
sensitivity**. The factory default setting is level 12.
Increase Sensitivity: Tap this button to increase the sensitivity of the Lightning
Bug™. When this button is pressed, the bargraph display (orange LED's) will be
show the current sensitivity level. There are a total of 26 levels of available
sensitivity**. The factory default setting is level 12.
** Determining the sensitivity level:
The orange LEDs will always display the current sensitivity level when the unit is
powered on, 1 being the least sensitive, and 26 being the highest. See Table 6.1
for more details.
Rev: Sept 21, 2012 Page 8 of 18