Master audio MAW218D7 User Manual

Master audio maw218d7 amplified subwoofer

Advertisement

Quick Links

MAW218D7
User's manual
Pol.Ind.Norte-Perpinyà,25
08226 TERRASSA (Barcelona-SPAIN)
info@master-audio.com
www.master-audio.com
Nov 2008

Advertisement

Table of Contents
loading

Summary of Contents for Master audio MAW218D7

  • Page 1 MAW218D7 User’s manual Pol.Ind.Norte-Perpinyà,25 08226 TERRASSA (Barcelona-SPAIN) info@master-audio.com www.master-audio.com Nov 2008...
  • Page 2 Amate Electroacústica,s.l. CAUT ION WARNING: To reduce the risk of fire or electric shock do not expose this equipment to rain or moisture RISK OF ELECTRIC SHOCK DON’T OPEN Safety Instructions 1. All the safety and operation instructions should be read before this product is operated.
  • Page 3 Amate Electroacústica,s.l. 1.INTRODUCTION 1.1.General Amate Electroacústica, s.l. would like to thank you for your confidence in our new MAW Series, specially designed for Line Array configurations. The accumulated experience of more than 30 years in the design of acoustic cabinets and amplifiers, together with the application of the most advanced technology and transducers, have allowed this series to become the optimal and ideal solution for a wide range of situations, specially those which require high levels...
  • Page 4 Amate Electroacústica,s.l. Each unit also includes lateral sockets which may be used to fix the TA-STK210/218 Kit Stacking to adapt the MA210 on the MAW218 (see point 5). Fig.1. Dimensions of MAW-218D 2.3. MAW-218/D System D=DSP version of MAW-218 with in-built amplification and internal processing through DSP included..
  • Page 5 Amate Electroacústica,s.l. A) RJ45 INPUT : PC Signal Input B) RJ45 LINK : PC Link Signal C) INPUT SIGNAL : Balanced XLR input signal connector 1= Ground 2= Live 3= Return D) LINK INPUT SIGNAL : Balanced XLR connector for paralleling several units, which will share the same input.
  • Page 6 Amate Electroacústica,s.l. When the Overvoltage LED lights (in RED) (Fig.2. LED OVERVOLTAGE (G)), the cabinet stops working (or works intermittently) until the correct voltage values are reached again. 4.FLYING The MAW218D cannot be flown. 5.STACKING The STK210/218 Hardware adapts the MAW218 with the MA210. With this accessory you can stack MA210 units over the MAW218 subwoofer.
  • Page 7 Amate Electroacústica,s.l. 6. TECHNICAL SHEETS MAW-218/D7 Line Input (Balanced) Impedance 1.8 V 10k ohms Mains 230V +/- 10% Consumption at Maximum Power 12 A Frequency Response LF Usable bandwidth 30 Hz - 130 Hz (-10 dB) (1W, processed) Sensitivity LF (1W @ 1m) 103 dB SPL Amplifier Power 3000 W...
  • Page 8 Amate Electroacústica,s.l. 7.TROUBLESHOOTING No Power • Make sure that the cabinet is plugged in. • The internal Breaker automatically protects the cabinet in case of bad working. No Sound • Check that the mixer, sound source and processor is sending signal to the unit. •...

Table of Contents