Connections; Modem Connection - Asus F5Z Hardware User Manual

Connections

The built-in modem and network cannot be installed later as an upgrade. After pur-
chase, modem and/or network can be installed as an expansion card.

Modem Connection

The telephone wire used to connect the Notebook PC's internal modem should have
either two or four wires (only two wires (telephone line #1) is used by the modem)
and should have an RJ-11 connector on both ends. Connect one end to the modem
port and the other end to an analog telephone wall socket (the ones found in residen-
tial buildings). Once the driver is setup, the modem is ready to use.
When you are connected to an online service, do not place the Notebook PC in sus-
pend (or sleep mode) or else you will disconnect the modem connection.
WARNING! Only use analog telephone outlets. The built-in modem does not sup-
port the voltage used in digital phone systems. Do not connect the RJ-11 to digital
phone systems found in many commercial buildings or else damage will occur!
CAUTION! For electrical safety concerns, only use telephone cables rated 2AWG
or higher. (see Glossary for more information)
Example of the Notebook PC con-
nected to a telephone jack for use
with the built-in modem:
Downloaded from LpManual.com Manuals
Using the Notebook PC
Telephone connector
is the smaller of the two.
Telephone cables
with RJ-11 connectors
Telephone Wall
Jack
4
EXPRESS
Telephone
connection is
optional
4