Table of Contents
Advertisement
7.
Use the hammer to tap the four t-nuts (Part # NU03) into the four holes near the round cutout. Keep
tapping until the t-nuts are flat against the board.
96
8.
Paint the side of the baffle board with the t-nuts and the inside surface of the round cutout flat
black. No other sides need to be painted.
while you are waiting.
97
9.
Now it is time to put on the grill cloth. Attaching grill cloth in a way that looks nice is not an easy
task. There are two goals to keep in mind in working with grill cloth: 1) keep the lines straight;
and 2) make the grill cloth tight. There are several different techniques for accomplishing these
two goals, but the process described here has worked well for us. If you aren't confident about
doing this step, call your local upholstery shop and they might be able to help you out.
The first part of putting on grill cloth consists of folding the four sides while carefully following straight
lines.
96
Allow to dry thoroughly! Go work on the cabinet
97
31
Advertisement
Table of Contents
