Advertisement
Getting Started with E-mail
• In the Connection: text box, select or
type the name of your ISP. In the Server:
text box, type the name of your POP3 or
IMAP4 server.
• In the User ID: text box, type your
e-mail log-in username provided by your ISP.
(For example, AT&T WorldNet User ID could be
joe_kelley@worldnet.att.net)
• In the Password: text box, type your
E-mail Log-in password provided by your ISP.
Note: The e-mail log-in username and password are
usually the same as your dial-in username and pass-
word. However, our AT&T example requires a different
e-mail log-in username and password than the dial-in
username and password used previously.
• Save Password should be checked.
• Tap the Next button.
• Leave the Domain: text box blank.
Note: If you are connecting with RAS, the domain name
is usually populated.
• In the SMTP host for sending mail:
text box, type the name of your SMTP
host provided by your ISP.
(For example: with AT&T WorldNet, SMTP host is
mailhost.worldnet.att.net)
Note: The POP3 and SMTP hosts may be the same or
different, as in the AT&T WorldNet example.
12
(continued)
• Type your e-mail address in the Return
address: text box.
(For example: AT&T WorldNet, Return Address could
be joe_kelley@worldnet.att.net)
• Tap Next, and Next again.
• From the top drop-down box, select
whether you want to receive message
headers only or full messages. Check the
appropriate boxes if you want to receive
meeting requests or file attachments.
• Tap the Finish button.
• Select OK from the menu.
• To send and receive e-mail, on the
Inbox screen, select Services and tap the
Connect button.
13
Advertisement
