Download
Share
Print this page
  1. Manuals
  2. Brands
  3. AirLinkWiFi Manuals
  4. Wireless Router
  5. UltraSky CPE2
  6. User manual

AirLinkWiFi UltraSky CPE2 User Manual

802.11a/b/g/n wireless router
Hide thumbs

Advertisement

Quick Links

Download this manual
802.11a/b/g/n Wireless Router
User Manual
1 / 62

Advertisement

loading
Need help?

Need help?

Do you have a question about the UltraSky CPE2 and is the answer not in the manual?

Questions and answers

Summary of Contents for AirLinkWiFi UltraSky CPE2

  • Page 1 802.11a/b/g/n Wireless Router User Manual 1 / 62...

  • Page 2: Software Installation Guide

    Software Installation Guide Gateway Mode Bridge Mode 3. Login the AP 1. Login the AP 4. Advanced setup 2. Advanced setup 4.1 Internet Settings 2.1 Internet Settings 4.2 Wireless Settings 2.2 Wireless Settings 4.2.1 Basic 2.2.1 Basic 4.2.2 Advanced 2.2.2 Advanced 4.2.3 Security 2.2.3 Security 4.2.4 WDS...

  • Page 3: Configure Computer

    Configure Computer Follow the instructions below to configure a computer running Windows XP: 1. From the Start menu on your desktop, go to Settings, and then click on Network Connections. 2. In the Network Connections window, right-click on Local Area Connection, then click Properties.

  • Page 4: Bridge Mode

    4. Select “Use the following IP address” by clicking the radio-button. In the IP address field, enter the address 10.10.10.x (x should be replaced by a number between 2 and 253, such as 101). In the Subnet mask field, enter 255.255.255.0.

  • Page 5: Advanced Setup

    name and password is “admin”),login windows as below: click “ok” button enter the main page You can select the language of administration page displays. There are three languages to choose from: English, Traditional Chinese, Simple Chinese. After your successful login, you can configure and manage the device. There are main menus on the left of the web-based utility.
  • Page 6 This page you may enable/disable networking functions and configure their parameters as your wish. for example, you can change the IP address and enable/disable the DHCP server, if there exist another DHCP server within your network, you must disable this AP’s DHCP server. As below: IP Address: Set the IP address of Intranet port.
  • Page 7 2.2 Wireless Settings 2.2.1 Basic could configure minimum number Wireless settings communication, such as Network Name (SSID) and Channel. The Access Point can be set simply with only the minimum setting items. 7 / 62...
  • Page 8 1. Wireless Network Radio On/Off: open and close the Wireless Network. Network Mode: you can select as below: 11a only: 11a mode, rate is 54 Mbps. 8 / 62...
  • Page 9 11n only(5G): 11n mode, rate is 300 Mbps(2T2R) 11a/n mixed mode: 11a/n mixed mode, rate is 54 Mbps and 300 Mbps. Other mode can’t be used. Network Name (SSID): Wireless LAN status authentication name, User can access the wireless networking through status authentication name only. Multiple SSID: Set SSID for the Multiple AP.
  • Page 10 1. Advanced Wireless BG Protection Mode: it is used to determine the state of BG Protected Mode. It is helpful to successfully connect to the 11n wireless network of slower wireless client ports in complex multi-modes. Default is Auto. You can select On or Off.
  • Page 11 Short Preamble: default is Disable. Short Slot: default is Enable. Tx Burst: default is Enable. Pkt_Aggregate: default is Enable. IEEE 802.11H Support: default is Disable. Country Code: Can choose None, US (United States), JP (Japan), FR (France), TW (Taiwan), IE (Ireland), HK (Hong Kong), default is None. 2.
  • Page 12 SHAREDWEP: another handshake method of WEP encryption which also encrypts through the WEP key and its encryption type is the same as that of the Open Mode. WEPAUTO: it can automatically select Open Mode or Shared Mode and its encryption type is the same as the first two. WPA: WPA that is authenticated by RADIUS server.
  • Page 13 2.2.4 WDS Wireless Distribution System Settings. In this mode, you can expand the scope of network by combining up to four other access points together, and every access point can still accept wireless clients. You can choose Disable, Lazy Mode, Bridge Mode, Repeater Mode. Lazy Mode: in Lazy Mode, users do not need to fill BSSID of the other side.
  • Page 14 When you select Enable, and click “Apply”, show the following window: WPS Summary: WPS information shows the current device WPS Mode: support two types of simple WPS settings: PBC and PIN code. PIN(Personal Identification Number): fill the personal identification number in the input box and click 'Apply'. At the same time, use the same PIN code to connect in the client ports (users could obtain personal identification number by clicking the 'Generate' button) PBC (Push-Button Configuration): Select the PBC or press the WPS button...
  • Page 15 2.2.7 Statistics Wireless TX and RX Statistics. 2.3 Wireless2 Settings 2.3.1 Basic could configure minimum number Wireless settings communication, such as Network Name (SSID) and Channel. The Access Point can be set simply with only the minimum setting items. 15 / 62...
  • Page 16 1. Wireless Network Radio On/Off: open and close the Wireless Network. Network Mode: you can select as below: 11b only: 11b mode, rate is 11 Mbps. 11g only: 11g mode, rate is 54 Mbps. 11b/g mixed mode: 11b/g mixed mode, rate is 11 Mbps and 54 Mbps. 11b/g/n mixed mode: 11b/g/n mode, rate is 11 Mbps,54 Mbps,150 Mbps/300Mbps.
  • Page 17 Multiple SSID: Set SSID for the Multiple AP. Broadcast Network Name (SSID): select to ban SSID of the AP broadcasts, and then wireless client ports will be unable to scan to SSID of the AP. Only when the client ports know SSID of the AP could they communicate with the AP. It is activated by default.
  • Page 18 4. Other HT TxStream: RF Transmit Stream. Default is 2. HT RxStream: RF Receive Stream. Default is 2. 2.3.2 Advanced Use the Advanced Setup page to make detailed settings for the Wireless. Advanced Setup includes items that are not available from the Basic Setup page, such as Beacon Interval, Control Tx Rates and Basic Data Rates.
  • Page 19 RTS Threshold: when the data packet size exceeds this threshold, the CTS / RTS mechanism is used to reduce the possibility of conflicts. Default is 2347. TX Power: You can set the output power of wireless radio. Unless you’re using this wireless AP in a really big space, you may not have to set output power to 100%.
  • Page 20 SHAREDWEP: another handshake method of WEP encryption which also encrypts through the WEP key and its encryption type is the same as that of the Open Mode. WEPAUTO: it can automatically select Open Mode or Shared Mode and its encryption type is the same as the first two. WPA: WPA that is authenticated by RADIUS server.
  • Page 21 2.3.4 WPS You could setup security easily by choosing PIN or PBC method to do Wi-Fi Protected Setup. Default is Disable. When you select Enable, and click “Apply”, show the following window: WPS Summary: WPS information shows the current device WPS Mode: support two types of simple WPS settings: PBC and PIN code.
  • Page 22 negotiation between them. At present, the WPS only support one client access. Two minutes later, the WPS indicator will be off.). WPS Status: WThe current state of Wi-Fi Protected setup: Idle means an idle status. Start WSC process means the process is activated and wait to connect. Whether WPS would go into effect: 'YES' means going into effect while the others means not.
  • Page 23 2.4.4 SAMBA Server 2.5 Administration 2.5.1 Management You may configure administrator account and password, NTP settings, and Dynamic DNS settings here. 23 / 62...
  • Page 24 Language Settings: select languages displayed on the management page. You can choose: English, Traditional Chinese, Simple Chinese. Adminstrator Settings: set the account and password of the administrator. NTP Settings: This section is to select the time zone for your location. If you turn off the AP, the settings for time disappear.
  • Page 25 2.5.2 Upload Firmware Upgrade the new firmware to obtain new functionality. It takes about 1 minute to upload upgrade flash and be patient please. Caution! A corrupted image will hang up the system. Update Firmware: upgrade the system software of the AP. Select the correct upgrade file and Click “Apply”...
  • Page 26 Import Settings: import local configuration file into the AP. The configuration items in the AP will update to the settings in the configuration file. Load Factory Defaults: the configuration in the AP would be restored into factory settings. 2.5.4 Status This page shows the current status and some basic settings of the device.
  • Page 27 2.5.6 System Command Run a system command as root. 27 / 62...
  • Page 28 2.5.7 SDK History This page shows SDK – History. 28 / 62...

  • Page 29: Gateway Mode

    Gateway Mode The first ethernet port is treated as WAN port. The other Ethernet ports and the wireless interface are bridged together and are treated as LAN ports. 3. Login the AP Input the website http://10.10.10.254 in Internet explorer address column, User should see the login page, input the user name and password (default user name and password is “admin”), login windows as below: click “ok”...
  • Page 30 Wireless2 Settings: Firewall: Storage: Administration: After finish AP modify, it must click “Apply” button (some item must restart system) for take it effect 4.1 Internet Settings 4.1.1 WAN You may choose different connection type suitable for your environment. Besides, you may also configure parameters according to the selected connection type.
  • Page 31 Fill all the information after, Click “Apply” button to finish the setting. 3. PPPoE (ADSL) If your access type is PPPoE, with ADSL virtual dialing, you need to fill in following details: User Name: Fill in ADSL access user name which supply by ISP, if you not sure can check with ISP.
  • Page 32 3. Manual: Users connect manually, when the network will not automatically connect when disconnected, take the user to connect their own. MAC Clone: Enable the MAC copy and the MAC address of extranet network ports could be set. Default is Disable. Fill all the information after, Click “Apply”...
  • Page 33 Operation Mode: There are two types of mode selection. Keep Alive and Manual MAC Clone: Enable the MAC copy and the MAC address of extranet network ports could be set. Default is Disable. Fill all the information after, Click “Apply” button to finish the setting. 5.
  • Page 34 Operation Mode: There are two types of mode selection. Keep Alive and Manual. MAC Clone: Enable the MAC copy and the MAC address of extranet network ports could be set. Default is Disable. Fill all the information after, Click “Apply” button to finish the setting. 4.1.2 LAN This page you may enable/disable networking functions and configure their parameters as your wish.
  • Page 35 IP Address: Set the IP address of Intranet port. Subnet Mask: Set subnet mask of Intranet. LAN 2: add one more IP in Intranet so that LAN users can also connect to the router through LAN network. MAC Address: Display the physical address of Intranet port. DHCP Type: only selecting 'Server' to activate the DHCP service, Intranet Host can dynamically obtain the IP.
  • Page 36 DHCP mode are included in this range. DNS Server: set the DNS server of Intranet Host here. Default Gateway: set the gateway of Intranet Host here. Release time: the effective time of the IP address obtained by Intranet Host. Statically Assigned: Host with specific physical address obtains the appointed IP through DHCP.
  • Page 37 Destination: The destination address of the static routing Range: You can choose to Host or Net, whether the destination address is a host or a network. If the destination address is a network, its netmask should be filled in. Gateway: Gateway of the static routing Interface: Identify which physical network port is the static routing transmitted from Comment: Depending on your needs, fill Comment.
  • Page 38 1. Wireless Network Radio On/Off: open and close the Wireless Network. Network Mode: you can select as below: 11a only: 11a mode, rate is 54 Mbps. 11n only(5G): 11n mode, rate is 300 Mbps(2T2R) 11a/n mixed mode: 11a/n mixed mode, rate is 54 Mbps and 150 Mbps /300 Mbps.
  • Page 39 Network Name (SSID): Wireless LAN status authentication name, User can access the wireless networking through status authentication name only. Multiple SSID: Set SSID for the Multiple AP. Broadcast Network Name (SSID): select to ban SSID of the router broadcasts, and then wireless client ports will be unable to scan to SSID of the router.
  • Page 40 1. Advanced Wireless BG Protection Mode: it is used to determine the state of BG Protected Mode. It is helpful to successfully connect to the 11n wireless network of slower wireless client ports in complex multi-modes. Default is Auto. You can select On or Off.
  • Page 41 Short Preamble: default is Disable. Short Slot: default is Enable. Tx Burst: default is Enable. Pkt_Aggregate: default is Enable. IEEE 802.11H Support: default is Disable. Country Code: Can choose None, US (United States), JP (Japan), FR (France), TW (Taiwan), IE (Ireland), HK (Hong Kong), default is None. 2.
  • Page 42 SHAREDWEP: another handshake method of WEP encryption which also encrypts through the WEP key and its encryption type is the same as that of the Open Mode. WEPAUTO: it can automatically select Open Mode or Shared Mode and its encryption type is the same as the first two. WPA: WPA that is authenticated by RADIUS server.
  • Page 43 4.2.4 WDS Wireless Distribution System Settings. In this mode, you can expand the scope of network by combining up to four other access points together, and every access point can still accept wireless clients. You can choose Disable, Lazy Mode, Bridge Mode, Repeater Mode. Lazy Mode: in Lazy Mode, users do not need to fill BSSID of the other side.
  • Page 44 When you select Enable, and click “Apply”, show the following window: WPS Summary: WPS information shows the current device WPS Mode: support two types of simple WPS settings: PBC and PIN code. PIN(Personal Identification Number): fill the personal identification number in the input box and click 'Apply'. At the same time, use the same PIN code to connect in the client ports (users could obtain personal identification number by clicking the 'Generate' button) PBC (Push-Button Configuration): Select the PBC or press the WPS button...
  • Page 45 Two minutes later, the WPS indicator will be off.). WPS Status: The current state of Wi-Fi Protected setup: Idle means an idle status. Start WSC process means the process is activated and wait to connect. Whether WPS would go into effect: 'YES' means going into effect while the others means not.
  • Page 46 1. Wireless Network Radio On/Off: open and close the Wireless Network. Network Mode: you can select as below: 11b only: 11b mode, rate is 11 Mbps. 11g only: 11g mode, rate is 54 Mbps. 11b/g mixed mode: 11b/g mixed mode, rate is 11 Mbps and 54 Mbps. 11b/g/n mixed mode: 11b/g/n mode, rate is 11 Mbps,54 Mbps,150 Mbps/300Mbps.
  • Page 47 Multiple SSID: Set SSID for the Multiple AP. Broadcast Network Name (SSID): select to ban SSID of the AP broadcasts, and then wireless client ports will be unable to scan to SSID of the AP. Only when the client ports know SSID of the AP could they communicate with the AP. It is activated by default.
  • Page 48 4. Other HT TxStream: RF Transmit Stream. Default is 2. HT RxStream: RF Receive Stream. Default is 2. 4.3.2 Advanced Use the Advanced Setup page to make detailed settings for the Wireless. Advanced Setup includes items that are not available from the Basic Setup page, such as Beacon Interval, Control Tx Rates and Basic Data Rates.
  • Page 49 RTS Threshold: when the data packet size exceeds this threshold, the CTS / RTS mechanism is used to reduce the possibility of conflicts. Default is 2347. TX Power: You can set the output power of wireless radio. Unless you’re using this wireless AP in a really big space, you may not have to set output power to 100%.
  • Page 50 SHAREDWEP: another handshake method of WEP encryption which also encrypts through the WEP key and its encryption type is the same as that of the Open Mode. WEPAUTO: it can automatically select Open Mode or Shared Mode and its encryption type is the same as the first two. WPA: WPA that is authenticated by RADIUS server.
  • Page 51 4.3.4 WPS You could setup security easily by choosing PIN or PBC method to do Wi-Fi Protected Setup. default is Disable. When you select Enable, and click “Apply”, show the following window: WPS Summary: WPS information shows the current device WPS Mode: support two types of simple WPS settings: PBC and PIN code.
  • Page 52 blinking time, you can enable another Router to implement the WPS/PBC negotiation between them. At present, the WPS only support one client access. Two minutes later, the WPS indicator will be off.). WPS Status: The current state of Wi-Fi Protected setup: Idle means an idle status.
  • Page 53 Default Policy -- The packet that don't match with any rules would be: You can choose to dropped and accepted, default is Dropped. 2. MAC/IP/Port Filter Settings Source MAC Address: the physical address of the matched data packets Dest IP Address: destination IP address of the data packets. Source IP Address: IP address of data packet sender.
  • Page 54 Port Forwarding: enable and disable Port Forwarding. Default is Disable. Virtual Server: enable and disable Virtual Server. Default is Disable. If you have changed the above settings, click “Apply” button Apply Settings. 4.4.3 DMZ You may setup a De-militarized Zone (DMZ) to separate internal network and Internet.
  • Page 55 DMZ Settings: enable and disable DMZ. Default is Disable. DMZ IP Address: The IP address of the computer you want to expose. If you have changed the above settings, click “Apply” button Apply Settings. 4.4.4 System Security You may configure the system firewall to protect AP/Router itself from attacking.
  • Page 56 Webs Content Filter: Filter the part 'Proxy Java ActiveX' of the web pages. Webs URL Filter Settings: filter out the entire content of the webpage of URL Webs Host Filter Settings: filter out the web pages that contain the keywords in the URL address.
  • Page 57 4.5.3 FTP Server 4.5.4 SAMBA Server 57 / 62...
  • Page 58 4.6 Administration 4.6.1 Management You may configure administrator account and password, NTP settings, and Dynamic DNS settings here. Language Settings: select languages displayed on the management page. You can choose: English, Traditional Chinese, Simple Chinese. Adminstrator Settings: set the account and password of the administrator. NTP Settings: This section is to select the time zone for your location.
  • Page 59 changing) IP-address. Dynamic DNS Provider: Select DDNS Provider. Account: Your registered Account from DDNS Provider. Password: Your registered password from DDNS Provider. DDNS: Your registered Domain name from DDNS Provider. If you have changed the above settings, click “Apply” button Apply Settings. 4.6.2 Upload Firmware Upgrade the new firmware to obtain new functionality.
  • Page 60 Export Settings: store the configuration file locally for later recovery. Import Settings: import local configuration file into the AP. The configuration items in the AP will update to the settings in the configuration file. Load Factory Defaults: the configuration in the AP would be restored into factory settings.
  • Page 61 4.6.6 System Command Run a system command as root. 61 / 62...
  • Page 62 4.6.7 SDK History This page shows SDK – History. 62 / 62...