43770 rev6_Layout 1 10/04/2013 16:06 Page 5
Using your kettle
Fill the kettle with water through either the Spout
(4)
or Lid (3), do not fill past the MAX line.
When boiled, the kettle will automatically
switch off. Remove from the Cordless Base.
Before first use
Before using the appliance for the first time, fill
with water, boil and pour away.
1
Place the kettle on the Cordless Base
press the On/Off Switch (6).
3
Pour the water from the kettle.
CAUTION: Will be hot
Removing the Filter
1.
Open the Lid (3).
2.
Lift the Filter
(10)
upwards from its holder.
3.
To refit the Filter, slide it into the side wall guides
of the filter holder until it clicks into place.
WARNING: Unless the filter is fitted correctly,
the kettle lid may not close and lock securely.
2
(8)
and
4
3