Stand Installation - VDigi 32E300CT User Manual

Stand Installation

Your TV is packaged with the TV stand separated from the cabinet. To setup the TV table stand,
please carry out the installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged.
Note:
1. The panel is easy to scratch, so please choose an absolutely flat surface to place the
TV, and use soft cloth or cushion to protect the TV panel. Do not put TV on table directly.
2. Always unplug the AC cord first when installing or removing the stand.
Step Two
Insert the stand support pillar into the stand as the arrow indicated direction, and then
fastened with three screws.
Step Three
Take the stand. Please align the screw holes of the stand and TV.
Insert the screws (which are totally the same) and tighten them.
Pedestal Screws Quantity
M4 x 10mm 3pcs
Pedestal Screws Quantity
M4 x 22mm
24
1pcs