Tone Signalling When Receiving Dsc Calls - Skanti VHF 1000 DSC Operator's Manual

Tone signalling when
receiving DSC Calls
TONE SIGNAL
DISTRESS
CALL
DISTRESS &
URGENCY
1 sec.
VHF
CONNECT
3 sec.
ALL SHIP
SAFETY CALLS
OTHER
DSC CALLS
35294
The tone signalling sequence is repeated every 30 seconds or
until the DSC call is either read or answered.
When handset is hooked off, there is a short tone every 30 seconds
until call is read.
Please note that if the radio receive a distress call when the speaker
volume is less than 10, the volume stays at 10 until you change it
back again.
20
7 sec.
30 sec.
Restarts
after
30 sec.