Table of Contents
Advertisement
C
O
N
N
E
C
T
I
N
C
O
N
N
E
C
T
I
N
Connecting Your Mini Camera to Your PC
Note: Before you connect your mini camera to your PC, you must have installed the TWAIN driver.
1. Hold down the Power/Mode button to turn off the camera.
2. Lift up the USB port cover.
3. Plug the smaller connector of the USB cable into your camera's USB port.
4. Plug the larger connector of the USB cable to your computer's USB port.
Note: Windows will prompt you to install hardware drivers the first time you connect your
mini camera to your PC after installing the software. Insert the supplied CD ROM into your
CD ROM drive and follow the on-screen instructions. If you subsequently connect the
camera to a different USB port on your PC, it may go through the hardware installation
routine once again.
5. Your PC now detects the camera.
The camera displays
6. Follow the on-screen instructions to complete installing the hardware drivers (video and still).
7. Click "Finish".
8. Click "Yes" to restart the computer.
G
T
O
Y
O
U
R
G
T
O
Y
O
U
R
in the LCD to indicate it is connected to your computer.
P
C
P
C
13
Advertisement
Table of Contents
Need help?
Do you have a question about the Go Vision 3-in-1 Mini Camera and is the answer not in the manual?