Viewports; Additional Fonts; Power Related Information - Toshiba Gigabeat F Series User Manual

Appendix B. Theme Tags
B.3. Viewports
Tag
%V(x,y,[width],
[height],[font])
%Vf([fgcolour])
%Vb([bgcolour])
%Vl('identifier',
...)
%Vd('identifier')
%Vi('label',...)
%VI('label')
B.4. Additional Fonts
Tag
%Fl('id',filename)
B.5. Power Related Information
Tag
%bl
%bv
%bt
%bp
%bc
%bs
The Rockbox manual
Description
See section 11.2.2
Preloads a viewport for later display. 'identifier' is a single
lowercase letter (a-z) and the '. . . ' parameters use the same
logic as the %V tag explained above.
Display the 'identifier' viewport. E.g. %?C<%Vd(a)|%Vd(b)>
will show viewport 'a' if album art is found, and 'b' if it isn't.
Declare a Custom UI Viewport. The '. . . ' parameters use the
same logic as the %V tag explained above. See section 11.2.2.
Set the Info Viewport to use the viewport called label, as de-
clared with the previous tag.
Description
See section 11.2.4.
Description
Numeric battery level in percents.
a conditional: %?bl<-1|0|1|2|...|N>, where the value
is used when the battery level isn't known (it usually is).
The value is only used when the battery level is ex-
actly 100 percent. An image can also be used, the propor-
tion of the image shown corresponds to the battery level:
%bl(x,y,[width],[height],image.bmp)
The battery level in volts
Estimated battery time left
"p" if the charger is connected (only on targets that can charge
batteries)
"c" if the unit is currently charging the battery (only on targets
that have software charge control or monitoring)
Remaining time of the sleep timer (if it is set)
Can also be used in
Toshiba Gigabeat F and X Series
186
1