SEASONS INSTALLATION MANUAL Table of Contents Introduction Installation Requirements and Recommendations 2 What’s included Required Tools/Items Optional Tools/Items Installation 1) Running the Wire 2) Tracing the Template and Drilling the Holes 3) Mounting the Speaker 4) Connecting the Wire 5) Adjusting the Bass 6) Aiming the Speaker Troubleshooting Technical Assistance...
Acoustics, we take pride in providing you with a high quality prod- • Wire stripper uct. All of Origin Acoustics’ speakers are designed to have excel- • Drill with ⅛” drill bit (Hammer drill for masonry) lent sound quality, longevity, and a simple installation process.
SEASONS INSTALLATION MANUAL Installation 2) Tracing the Template and Drilling the Holes Using the template, mark the 1) Running the Wire location for the screws on the wall. (The speaker can be Fully plan out how you’ll route the wire to the desired speakers. mounted vertically or horizon- tally.) When choosing the point where the wire exits the house, remem-...
SEASONS INSTALLATION MANUAL 4) Connecting the Wire If it’s difficult to insert the connector because the mounting brack- et is in the way, the bracket can be rotated to the side. Simply turn Strip ¼” (6 mm) of the insulation off both ends of the wire. To the knobs on the top and bottom counter clockwise to loosen the avoid stray strands, twist them at the end.
If you are considering returning the product, it’s required that you contact Origin Acoustics prior to any return attempts. Make sure the proper source is selected on the am- This way we can determine if the issue can be resolved without plifier or receiver.
Origin Acoustics warrants to the original retail purchaser only that applied to other purchases. The purchaser must be prepared to this Origin Acoustics product will be free from defects in materials provide proof of purchase (receipt). This warranty will not be val-...