SNIPER X2 Installation Manual

Vehicle security system

Advertisement

Quick Links

1. SYSTEM FEATURES

-
Remote Arming/Disarming
-
Silent Arming/Disarming
-
2 Plug-in Sensor Ports
-
Temporary Remote Sensor Bypass
-
Panic Mode
-
Valet Mode
-
Optional Coded Emergency Override
-
Remote Boot Release
-
Car Finder
-
Open Circuit Alert
-
Door Open Alert
-
Total/Comfort Closure
-
Auto. Engine Disable
-
Programmable Auto. Rearming
-
Tamper Alert
-
Remote Passive Arming On or Off
-
Interior Light Supervision

2. SYSTEM OPERATION

2.1. Arm Condition Memory

If power to the alarm is removed it will remain in the same status when power it restored.
SNIPER X2 VEHICLE SECURITY SYSTEM
Installation Manual
-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X2 and is the answer not in the manual?

Questions and answers

Summary of Contents for SNIPER X2

  • Page 1 SNIPER X2 VEHICLE SECURITY SYSTEM Installation Manual 1. SYSTEM FEATURES Remote Arming/Disarming Silent Arming/Disarming 2 Plug-in Sensor Ports Temporary Remote Sensor Bypass Panic Mode Valet Mode Optional Coded Emergency Override Remote Boot Release Car Finder Open Circuit Alert Door Open Alert Total/Comfort Closure Auto.
  • Page 2 2.2. Button Function Button Armed Disarmed IGN On BTN #1 once Door Lock BTN #2 once Disarm Disarm Door Unlock BTN #1 2 sec. Panic Panic BTN #3 once Car Finder Car Finder BTN #3 2 sec. Boot Release Boot Release Boot Release BTN #4 3 sec.
  • Page 3 2.5. Open Circuit Alert If a door/boot/bonnet is open when the alarm is armed by the remote control the siren will chirp once and hazard lights flash once as normal and then the siren will chirp and the hazard lights flash as follows: When programmable feature #10 is disabled.
  • Page 4 B. 2 stage of sensor trigger The siren will sound for one cycle. The hazard lights will flash for one cycle. The LED will flash for 1 cycle (1 flash). C. Boot or bonnet trigger (opened then closed) The siren will sound for 1 cycle. The hazard lights will flash for 1 cycle.
  • Page 5 2.13. Ignition Lock and Unlock A. Ignition lock After turning the ignition on, the system will lock the doors automatically depending on the setting of programmable feature #3. B. Ignition unlock After turning the ignition off, the system will unlock the doors automatically depending on the setting of programmable feature C.
  • Page 6 2.21. Anti-hijacking by Ignition+Door (if enabled) When enabled the Anti-hijacking will be activated as follows: With the system disarmed and the ignition on. Opening and closing a door will activate the anti-hijacking and the hazard lights will flash once to confirm. The anti-hijacking countdown will start immediately or after the brake pedal is pressed depending on the selection of feature #17.

Table of Contents