Setting Up Remote Power - acelerated 6200-FX User Manual

Setting up Remote Power

If remote power is necessary, a Passive Power-Over-Ethernet (PoE) injector is included with every
6200-FX.

Plug the 12V power adapter into the female 2.1mm plug on the Passive PoE injector.

Plug the male RJ-45 Ethernet plug of the Passive PoE injector into the Router or other end
device. Plug the female RJ-45 Ethernet plug of the Passive PoE injector into the 6200-FX. The
length has been tested to over 300 feet with standard Category 5 cabling.

PoE DC - Red LED that indicates DC Power Adapter is connected to PoE Cable with power.

PoE PWR - Green LED That indicates Cat 5 Ethernet Cable is connected to 6200-FX unit with
power.

When both the RED and GREEN lights are illuminated, everything is connected properly.
Accelerated Concepts, Inc. © 2014 19 of 35 6200-FX User's Guide v2.3