Haibrain PGSD834 User Manual

Wireless smoke detector

Advertisement

Quick Links

PGSD834
Wireless Smoke Detector
USER MANUAL
20547/201200711 • PGSD834
ALL RIGHTS RESERVED HAIBRAIN ©

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PGSD834 and is the answer not in the manual?

Questions and answers

Summary of Contents for Haibrain PGSD834

  • Page 1 GSD834 PGSD834 ™ Wireless Smoke Detector USER MANUAL 20547/201200711 • PGSD834 ™ ALL RIGHTS RESERVED HAIBRAIN ©...
  • Page 2: Table Of Contents

    DECLARATION OF CONFORMITY ..........11 COPYRIGHTS ................12 SAFETY WARNINGS • The PGSD834 smoke detector is designed specifically for localised home use. If smoke is detected, the appliance will sound a piercing alarm. Make sure the smoke detector is installed in such a way that the built-in siren will be heard by residents even when they are asleep.
  • Page 3: Introduction

    The smoke detector incorporates the following features: • It monitors rooms for the development of smoke. • It has an integrated signal transmitter to trigger a Haibrain ProGuard800 Security system. 2. APPLICATION The radio smoke detector is intended for the detection of smoke in interiors by the use of optical and acoustic warnings, ©...
  • Page 4: Positioning

    Before installing the PGSD834 smoke detector on your ceiling or the wall, ensure that the PGSD834 is within range of your Haibrain security system. You can test this by pushing the test...
  • Page 5: Installation

    PGSD834. The Haibrain security system should now be triggered, depending on the settings. In the case of range problems, choose a different location for your PGSD834 smoke detector. Moving the PGSD834 just a few centimetres can make a big difference in range.
  • Page 6: Replacing The Batteries

    Leakage could cause damage to the alarm, furniture and carpeting. WARNING: Use of any other battery than specified in the technical data may be detrimental to the operation of the Smoke Detector. PGSD834...
  • Page 7: Cleaning Your Smoke Detector

    LED indicator will continue to flash, until it is manually restored by the user. To restore – press the test button for 2-3 seconds, the LED will stop flashing. © HAIBRAIN...
  • Page 8: Warning! Limitations Of Smoke Alarms

    However, no matter how good a detection device is, nothing works perfectly under every circumstance and we must warn you that you cannot expect a smoke alarm to ensure that you will never suffer any damage or injury. PGSD834...
  • Page 9: Technical Data

    53 mm Alarm Sound Level: Exceeds 85dB at 3m Transmitter Characteristics: Nominal Center Frequency 868 MHz Supervision Time 65 min In order to continue improving the product, Haibrain reserves the right to change specifications and/or designs without prior notice. © HAIBRAIN...
  • Page 10: Declaration Of Conformity

    DECLARATION OF CONFORMITY Hereby, Haibrain BV, declares that this PGSD834 is in compliance with the essential requirements and other relevant provisions of the following Directives: Directive 1999/5/EC of the European Parliament and of the...
  • Page 11: Copyrights

    Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text and photographs) rests with Haibrain B.V. Any use of the Content, but without limitation, distribution, reproduction, modification, display or transmission without the prior written consent of Haibrain is strictly prohibited.

Table of Contents