Making A 10-4 Call (Group Call); Making A 10-4 Call By Entering A Number - Sanyo S1 User Manual

Making a 10-4 Call (Group Call)

You can make a 10-4 call to all members in a Group entry, which
you have in your 10-4 List. You can communicate with up to five
members at a time.
1. Press
10-4
2. Press
Go to
want to make a Group call (Company Grps. or Personal Grps.)
and press
3. Highlight the group entry you want to call, and press and hold
to place the call and take the floor. (You will see
10-4 calling... and Connecting... followed by "You have floor."
Continue with the 10-4 call as described previously.)
To make a 10-4 call to a group member, select your
desired group, highlight your desired group member, and
press and hold
If one of the group members takes the floor, you will see
the member's name and 10-4 number on the display.
4. When the call is finished, press
Tip:
The phone beeps if you press
You can also make a Group Call after checking the group member.
Press to display group members, highlight
press and hold
To redial your last 10-4 call, highlight
10-4 List.

Making a 10-4 Call by Entering a Number

1. From standby mode, enter the 10-4 number you want to dial.
2. Press
3. Continue with the 10-4 call, pressing and holding
speak and releasing it to allow other parties to reply.
4. When the call is finished, press
– or –
1. Press
10-4
2. Press
Go to
(left softkey) or
(left softkey), and select the list from which you
.
.
during step 3 above.
to place the 10-4 call.
(left softkey) or
(left softkey) > Enter 10-4#.
to access the 10-4 List.
.
when another party has the floor.
<Call Group>
Redial
and press
.
to access the 10-4 List.
and
from the
to
85