LG TD7130 User Manual page 59

Making a Data Call
Windows 2000 Users
1. Under Start Menu select Network Connections.
Click on your newly created Dial up. Click Dial to
connect.
2. An authentication message will confirm your suc-
cessful log-in.
3. If the connection fails, check your settings and try
again.
4. To disconnect, just press End key or right click in
connection icon or icon in the system tray.
Windows XP Users
1. Click Dial to initiate the Dial Up connection.
2. An authentication message will confirm, your suc-
cessful log-in.
3. If the connection fails, check your settings and try
again.
4. To disconnect, just press End Key or right click on
connection icon or icon in the system tray.
Windows 98 / ME Users
1. Click Dial to initiate the Dial Up connection under
Dial Up Networking.
2. Enter the username as
the password as telstra.
114
LG-TD7130
user@telstra.internet and
3. Click Connect to dial.
4. An authentication message will confirm your suc-
cessful log-in.
5. If the connection fails, check your settings and try
again.
6. To disconnect, just press End Key or right click on
connection icon or icon in the system tray.
Connecting data outside CDMA 1x coverage area
of Telstra Mobile
1. When making a data call outside CDMA 1X cover-
age area, Windows will prompt you to re-enter the
Username and Password. At this point enter the
username qncuser and password ssqnc.
P/N : MMBB0099501 (1.0) Date : 2003. 9. 23
LG-TD7130
115