Related Manuals for Redgum RGi35ENR
Summary of Contents for Redgum RGi35ENR
- Page 1 INTEGRATED AMPLIFIER RGiENR SERIES RGi35ENR RGi60ENR RGi120ENR OWNER’S MANUAL...
- Page 2 Please read the guide, follow the instructions and you will be listening to the best sound available today with the right choice of speakers and suitable environment. Once again thanks for your purchase of my very own REDGUM audiophile amplifiers. Yours faithfully,...
- Page 3 YOUR AMPLIFIER COMES PACKED IN A HEAVY DUTY EXPORT QUALITY CARDBOARD CARTON. PLEASE KEEP THIS CARTON AS YOU MAY BE REQUIRED TO SHIP YOUR UNIT TO A DIFFERENT LOCATION AT A LATER DATE AND THIS WILL BE THE BEST WAY TO SHIP YOUR AMPLIFIER. THE UNIT COMES SUPPLIED WITH….
- Page 4 After unpacking…. Place the amplifier on a sturdy and stable surface as the item is heavy. Plug in the mains power cord into the REAR of the amplifier ONLY at this time. The rear panel is equipped with an array of five inputs with varying colours for each input. These coloured inputs correspond to the indicator lights on the front panel.
- Page 5 0.25W. More typically, the stand-by power is 0.1W. REGISTRATION: Please ensure your warranty card is filled and returned to REDGUM Audio as soon as the item is installed. This will register your amplifier with us and any warranty claims can be attended to promptly.
-
Page 6: Specification
SPECIFICATION: RGi35ENR Power Output: Continuous RMS output power per channel, both channels driven 20-20 kHz 2 x 65 watts (8 ohms); 2 x 80 watts (4 ohms); 2 x 95 watts (2 ohms) Transient Power RMS: 2 x 140 watts (8 ohms); 2 x 270 watts (4 ohms); 2 x 560 watts (2 ohms) Harmonic Distortion: 0.009% (below clipping) - Page 7 RGi120ENR Power Output: Continuous RMS output power per channel, both channels driven 20-20 kHz 2 x 175 watts (8 ohms); 2 x 265 watts (4 ohms); 2 x 500 watts (2 ohms) Transient Power RMS: 2 x 310 watts (8 ohms); 2 x 630 watts (4 ohms); 2 x 1265 watts (2 ohms) Harmonic Distortion: 0.009% (below clipping) Intermodulation Distortion: <...
-
Page 8: Warranty
N.B. As per industry standard, fuses, lamps (LEDs) or batteries are not covered under warranty. Should the product be faulty, the owner is liable for the cost of freight to the nearest REDGUM repair agent, or the REDGUM Audio factory. Should the product be found to be without fault, the owner will be liable for the return freight.