1. Manuals
  2. Brands
  3. Smart+ Products Manuals
  4. Other
  5. SPP-PP1800-6WCH
  6. Owner's manual

Smart+ Products SPP-PP1800-6WCH Owner's Manual

Infrared zone heating system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INFRARED ZONE HEATING SYSTEM
OWNER'S MANUAL
Model No. SPP-PP1800-6WCH
WARNING: READ THIS ENTIRE OWNER'S MANUAL CAREFULLY BEFORE USE.
1

Advertisement

Table of Contents
loading

Summary of Contents for Smart+ Products SPP-PP1800-6WCH

  • Page 1 INFRARED ZONE HEATING SYSTEM OWNER’S MANUAL Model No. SPP-PP1800-6WCH WARNING: READ THIS ENTIRE OWNER’S MANUAL CAREFULLY BEFORE USE.

  • Page 2: Important Safety Instructions

    Thank you for choosing a SMART+ PRODUCTS Infrared Zone Heating System. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater.
  • Page 3 READ AND UNDERSTAND ALL INSTRUCTIONS, SAFETY WARNINGS, AND FAQ’s BEFORE USING THE HEATER WARNING! ! POTENTIAL FOR ELECTRICAL HAZARD IF NOT ADHERED TO! When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1.
  • Page 4 10. Never place heater where it may fall into a bathtub or other water receptacles. 11. Do not run cord under carpet. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over. 12.

  • Page 5: Frequently Asked Questions (Faqs)

    SMART+ PRODUCTS Products, although it is not recommended (unless you are a certified heater technician or authorized directly by SMART+ PRODUCTS). All parts may be purchased through SMART+ PRODUCTS PRODUCTS if your product is out of warranty.
  • Page 6 Definitely NOT! If you don’t have a grounded outlet, contact a certified electrician for advice. Removing or altering any part of the heater’s original design or intent (including the power cord) will not only void the warranty, but will make you liable for any unexpected or hazardous results. Why doesn’t the temperature on my heater match the temperature display on my wall, or external thermostat? This is completely normal.
  • Page 7 I purchased my heater so that it could cut my heating costs, but my electric bill has gone up. Why? The compact SMART+ PRODUCTS heater can definitely save you on heating costs, when compared to the existing central heating system in place in your home, and when used as directed.

  • Page 8: Specifications

    SPECIFICATIONS Voltage Rating 120 V (60Hz) Power Consumption 1000W/ 1500W Unit Size in. (W) x 20 in. (D) x 17 in. (H) Unit Weight 40 lbs SAFETY FEATURES Tip-Over Safety Feature This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off.

  • Page 9: Product Diagram

    PRODUCT DIAGRAM Wooden Cabinet Remote Control Power Mode Temp. Up Temp. Down Air Outlet Timer Cord Clamp Power Mode Control Panel Temp. Up Temp. Down Timer Air Intake Wheel Control Panel (Ref Fig. 1 next page) 1、Signal-receiving window: For receiving remote control signal. 2、Digital display：Indicate set room temperature or time value according to the timer.
  • Page 10 Fig.1 RCIN Temp./Time ¡ æ ¨ H High Timer Power Timer ON/OFF Mode Remote Control ON/OFF button: Used for power-on or power-off Temp up button: To make set temperature rise Temp down button: To make set temperature decline Mode button: Used for mode selection ℃/℉button : Button for alternating between Fahrenheit and Celsius.
  • Page 11 PREPARATION Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate heater in upright position with caster wheels attached. Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
  • Page 12 OPERATING INSTRUCTIONS 1. Power the Display On/Off and Select Desired Mode Turn the heater on by pressing the ON/OFF button on the control panel or by pressing the Power button on the supplied remote control. Turn the heater off by pressing the ON/OFF button on the control panel or by pressing the Power button on the supplied remote control.
  • Page 13 The Fahrenheit indicator LED will light, when the temperature is displayed in Fahrenheit. The Celsius LED will light, when the temperature is displayed in Celsius. POWER-OFF TIMER 3. Setting the Function Note: The Power-Off-Timer Function will allow for the heater to power OFF after a certain set time, and can only be set while the heater’s display is in the “On”...

  • Page 14: Maintenance

    5. Setting Electro Lock The Electro Lock can help avoid the heater from being accidentally engaged by children. The locking mechanism can be set in both the ON and OFF modes. Press Temp Up and Temp Down buttons at the same time for 3 seconds.

  • Page 15: Basic Troubleshooting

    The unit Air intake grille Air filter PULL 7. If won’t use the unit for a long time, please take batteries out of the remote control according to following steps, then store remote in a safe place. PUSH Battery STORAGE Store the heater in a cool, dry location when not in use.
  • Page 16 degrees higher than the temperature in the room. If it seems to not be heating, increase the desired temperature on the heater to engage the heat elements.

Table of Contents