1. Manuals
  2. Brands
  3. Astrolite Manuals
  4. Light Fixture
  5. HELIOS 3W
  6. User manual

Astrolite HELIOS 3W User Manual

Hide thumbs
1
2
3
4
5

Advertisement

Table of Contents

HELIOS 3W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HELIOS 3W and is the answer not in the manual?

Questions and answers

Summary of Contents for Astrolite HELIOS 3W

  • Page 1 HELIOS 3W...

  • Page 2: Safety Instructions

    INTRODUCTION Thank you for having chosen the item. You will see you have acquired a powerful and versatile device. Unpack your item. Before you initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device.

  • Page 3: Connection With The Mains

    Building a serial DMX-chain: Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always connect one output with the input of the next fixture until all fixtures are connected. Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.
  • Page 4 DMX function Channel Mode Select internal Output Control Strobe Speed No function Step Speed No function program (128) Green Blue Output Control Strobe Speed Step Speed ON no strobe Strobe speed Master Dimmer No using Sound control effect increasing 0-255 0-255 0-255 6-10...

  • Page 5: Technical Specifications

    2) Manual Mode: In Manual Mode, press the FUNCTION button after entering this mode, the LED menu display will show correspondingly R000 or G000 or B000. R denotes red output, G denotes green output and B denotes blue output. Press UP or DOWN to adjust the output figure from 000 to 225.

Table of Contents