Table of Contents
Advertisement
Quick Links
Reference grade integrated two-channel amplifier
Purchased from Dealer:
Purchased from Dealer:
Purchased from Dealer:
Purchased from Dealer:
Purchase Date:
Purchase Date:
Purchase Date:
Purchase Date:
Invoice Number:
Invoice Number:
Invoice Number:
Invoice Number:
Virtue ONE & TWO Owner's Manual
Owners Manual
Powered by Tripath™ technology
http://www.virtueaudio.com
Serial Number:
Serial Number:
Serial Number:
Serial Number:
Page 1 of 11
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Virtue Audio one
- Page 1 Purchased from Dealer: Purchased from Dealer: Serial Number: Serial Number: Serial Number: Serial Number: Purchase Date: Purchase Date: Purchase Date: Purchase Date: Invoice Number: Invoice Number: Invoice Number: Invoice Number: Virtue ONE & TWO Owner’s Manual http://www.virtueaudio.com Page 1 of 11...
- Page 2 We started Virtue in 2005 with the dream of bringing the sensory experience of the high-end audio to the masses. Welcome to our family! If you’re already an audiophile, you know already that this amplifier is one of the best sounding, highest value audio products ever made. If you simply like listening to good music, we hope to help you appreciate of accurate sound reproduction and museum-caliber build quality.
-
Page 3: What's In The Box
“audiophile” to “virtue” but the box was not reprinted. Virtue 2. Power Supply unit (PSU) 3. AC power cord amplifier 4. Volume knob (must be attached, preferably glued) Virtue ONE & TWO Owner’s Manual http://www.virtueaudio.com Page 3 of 11... -
Page 4: Setting Up Your Amplifier
The flat part on the bushing should correspond with the flat part of the POT/attenuator shaft. Virtue ONE & TWO Owner’s Manual http://www.virtueaudio.com Page 4 of 11... - Page 5 With Tripath™ amps such as this one, there is a decent chance that your subwoofer amplifier will bridge the amp’s speaker outputs, blowing up your Virtue amp. If you want to prevent low frequencies from reaching your main speakers, follow the instructions below about changing the main input capacitors.
- Page 6 (signaling clipping) is normal. If you see the red light come on often or consistently during normal listening, please consider upgrading the PSU or turning down the volume. Clipping can damage speakers. Virtue ONE & TWO Owner’s Manual http://www.virtueaudio.com Page 6 of 11...
- Page 7 After removing the screws, spring open the shell and gently slide back, half way. Do not slide the cover off fully before unfastening the LED tether. Unfastening the LED Unfastening the LED Unfastening the LED Unfastening the LED Virtue ONE & TWO Owner’s Manual http://www.virtueaudio.com Page 7 of 11...
- Page 8 Then reinstall the pot. *We recommend trying the volume in full open position with your preamp first, to be certain this works well with your system. Virtue ONE & TWO Owner’s Manual http://www.virtueaudio.com Page 8 of 11...
-
Page 9: Troubleshooting
Virtue amplifiers are triple checked and burned in for 24-hours before shipment to customers and are built to provide a lifetime of use. Here are the most common problems that customers have experienced and recommended solutions. Issue: Sound is only coming through one c Sound is only coming through one channel hannel... - Page 10 Both the ONE and TWO amplifiers will play more than 90wpc cleanly at 30v with sufficient current. The unit will drive loads as low as 2 ohms and with speakers as insensitive as 83db, we have many satisfied customers.
-
Page 11: Specifications
200w (both channels) Warranty Virtue Audio products are guaranteed to be free of defects for 2 years from the time of purchase. If you experience what you consider a defect, please visit the “Contact Us” section of the Virtue Audio website and submit a message with the type “Product Issue”.
Need help?
Do you have a question about the one and is the answer not in the manual?
Questions and answers