Summary of Contents for Hendy Amps Rembrandt
- Page 1 Rembrandt Two Channel, All Tube Mic Preamplifier Operating Instructions Hendyamps - Rembrandt Page © 2015 - Hendyamps LLC...
- Page 2 Contact Info: info@hendyamps.com www.hendyamps.com Hendyamps - Rembrandt Page © 2015 - Hendyamps LLC...
- Page 3 Heck, if you want to print a thousand copies and send them to your friends, by all means…Just don’t expect them to remain friends for long. Copyright © 2015 - Hendyamps LLC Hendyamps - Rembrandt Page © 2015 - Hendyamps LLC...
-
Page 4: Limited 5 Year Warranty
Hendyamps will not be bound by this warranty to fix your gear for free. *Tubes are not covered by this five year warranty. Tubes are fickle things and really can be a huge pain…its just too bad they sound so good. Hendyamps - Rembrandt Page © 2015 - Hendyamps LLC... - Page 5 Hendyamps gear. Please do NOT do this because the tubes are running on voltages well over 300v! Touching anything inside the unit will probably end with you on the news…in a bad way. Hendyamps - Rembrandt Page © 2015 - Hendyamps LLC...
- Page 6 I have an ear that is especially tuned for the needs of a discerning musician as well as the precision needed for the studio.” - Chris Henderson (Founder and owner of Hendyamps) Hendyamps - Rembrandt Page © 2015 - Hendyamps LLC...
- Page 7 The Hendyamps Rembrandt Housed in a 2U rack unit, the Rembrandt is centered around the EF806 pentode tube, which provides some of the most sonically pleasing amplification available. The signal first enters the preamp by passing through an ultra high fidelity Jensen transformer, and from there moves to the EF806, followed by a 12au7.
-
Page 8: Front Panel Controls
Front Panel Controls The Rembrandt includes an “Air” switch that allows for the boosting of the high frequencies, often improving the clarity of darker sources, and/or microphones. 2. 1/4”, unbalanced, HiZ input. This is ideal for bass, guitar, or keys. -
Page 9: Rear Panel Controls
15. Line level balanced output - XLR (Pin 1 = Ground, Pin 2 = Hot, Pin 3 = Cold) 16. Mic level balanced input - XLR (Pin 1 = Ground, Pin 2 = Hot, Pin 3 = Cold) Hendyamps - Rembrandt Page... -
Page 10: Specifications
Gain: 70db+ Frequency Response: 10hz-20Khz +/- 1dB Phantom Power: 48v Power: 115v/120v Dimensions: 2u Faceplate - 19” x 3.4375” Cabinet - 3.25” (H) x 16.625” (W) x 9.625” (D) info@hendyamps.com www.hendyamps.com Hendyamps - Rembrandt Page © 2015 - Hendyamps LLC...