Related Manuals for StarMax 515TGD
Summary of Contents for StarMax 515TGD
- Page 1 ® ELECTRIC GRIDDLES MODEL 515TGD, 524TGD, 524TGDS, 536TGD, 536TGDS, 548TGD, 548TGDS, CHROME-MAX MODEL 524CHSD, 536CHSD, 548CHSD Installation and Operation Instructions 2M-Z6125 Rev. H 3/8/12 536TGD...
-
Page 2: Safety Symbol
SAFETY SYMBOL These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability. -
Page 3: Installation
T his equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. CAUTION B efore using your new equipment, read and understand all the instructions & labels associated with the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit. A ll shipping containers should be checked for freight damage both visible and concealed. This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier. C oncealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a request for inspection of concealed damage must be made with carrier within 15 days. Be certain to retain all contents plus external and internal packaging materials for inspection. The carrier will make an inspection and will supply necessary claim forms. INSTALLATION The griddles are equipped for the voltage indicated on the nameplate mounted under the bullnose on the front panel. They will operate on alternating current (AC) only. DO NOT CONNECT TO DIRECT CURRENT (DC). WARNING The installation of the electric griddle should conform to the: NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND ORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES AND REGULATIONS... - Page 4 SEASONING THE GRIDDLE HEATING SURFACE (NON CHROMIUM SURFACE) Clean the griddle surface thoroughly. After the griddle has been thoroughly cleaned, it should be seasoned to prevent food from sticking. Before using and after each thorough scouring, season the griddle heating surface in the following manner. 1. Turn temperature control dials to 50°F (177°C). 2. Using a clean cloth, not a spatula, spread a thin film of cooking oil over the griddle cooking surface. This film should remain on the hot griddle surface for half an hour. . Remove the excess oil and wipe clean.
- Page 5 GRIDDLE CARE (CHROMIUM SURFACES) It takes very little time and effort to keep this Industrial Chromium griddle surface sparkling clean and performing at top efficiency. DO NOT allow grease to accumulate as it will carbonize and become difficult to remove. To prevent this condition the following cleaning suggestions should be followed: 1. Remove excess grease and food regularly with a 4” (100mm) wide Razor Sharp type scraper and wipe surface with a damp cloth if desired. 2. Following the scraping, for end of the day cleaning, a damp cloth and a non-silicated, non-abrasive, non-chlorinated cleaner such as Bon-Ami may be used to wipe surface clean, followed by wiping with a clean wet cloth. . Follow steps 2 and from Griddle Care (Non-Chromium Surfaces) above. 1. Never use pumice, griddle stones, or abrasives on a chromium surface. 2. Never strike a chromium griddle surface with a sharp instrument or spatula edge. . Never use steel wool. CAUTION 4. Never use commercial liquid grill cleaner on the griddle surface.
- Page 6 Visit our Website at: www.star-mfg.com Email: service@star-mfg.com THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit.
- Page 11 Nameplate SOME ITEMS ARE INCLUDED FOR ILLUSTRATIVE PURPOSES ONLY AND IN CERTAIN INSTANCES MAY NOT BE AVAILABLE STAR MANUFACTURING INTERNATIONAL, INC. MODEL - 524TGD, 524CHSD SK1981 REV. A 5/9/03...
-
Page 12: Parts List
PARTS LIST February 08, 2013, Rev. H 515TGD, 524TGD/S, 524CHSD, 536TGD/S, 536CHSD, 548TGD, 548CHSD 15”, 24”, 6” and 48” Star-Max/Chrome-Max Electric Griddles MODEL Number Part Number Number Unit Description and Model Designation G-51510 GRIDDLE PLATE STUDDED 515TGD G-52410 GRIDDLE PLATE STUDDED 524TGD G3-524311 GRIDDLE PLATE STUDDED 524CHSD G-52412 DIVIDED PLATE ASSEMBLY 524TGD-DIV G-5610 GRIDDLE PLATE STUDDED 56TGD G3-536311... - Page 13 PARTS LIST February 08, 2013, Rev. H 515TGD, 524TGD/S, 524CHSD, 536TGD/S, 536CHSD, 548TGD, 548CHSD 15”, 24”, 6” and 48” Star-Max/Chrome-Max Electric Griddles MODEL Number Part Number Number Unit Description and Model Designation 2J-Y6690 1/2/3/4 PILOT LIGHT 515 / 524 / 536 / 548 2M-Z5900 GRAPHIC PANEL 515TGD 2M-Z5910 GRAPHIC PANEL...
Need help?
Do you have a question about the 515TGD and is the answer not in the manual?
Questions and answers