Remote Control - Johnson PL4 Operator's Manual

REMOTE CONTROL

WARNING
If you choose a non- Evinrude/Johnson
remote control, be sure it has a start-in-gear
prevention feature. This feature can prevent
injuries resulting from unexpected boat
movement when the engine starts.
IMPORTANT: When selecting the remote control
system for your boat, specify Evinrude/Johnson
components. Evinrude/Johnson offers remote con-
trols, cables and wiring kits designed specifically for
your Evinrude/Johnson
Johnson controls deliver the cable stroke your out-
board needs for positive shift and throttle control,
and they incorporate such safety and convenience
features as:
Start-in-gear prevention
Plug-in compatibility with Evinrude/Johnson modu-
lar wiring system
Evinrude/Johnson Concealed side mount control
1. Handle – shift and throttle
2. Trim/tilt switch (where equipped)
3. Neutral lock tab
4. Fast idle button
5. Throttle friction control
outboards. Evinrude/
Evinrude/Johnson Binnacle mount control
1. Handle – shift and throttle
2. Trim/tilt switch (where equipped)
3. Fast idle button
4. Throttle friction control
5. Emergency stop clip and lanyard
1
2
5
Evinrude/Johnson Side mount control
1. Handle – shift and throttle
2. Trim/tilt switch (where equipped)
3. Neutral lock tab
4. Fast idle lever
5. Emergency stop clip and lanyard
6. Throttle friction control
3
4
6
General Information -
15