Advertisement
Congratulations on the purchase of your new RANDALL MOR Pedal! We at Randall Amplification appreciate that you chose our brand of guitar instrument amplifiers and wish
you years of great tone and enjoyable playing time with your new machine. Please review the safety instructions and be aware that the documentation provided in this manual.
MOR KNOB
Turn to the right to make more level happen.
- in front of amp it will push more gain at the
first preamp stage - great with tube amps!
- in an effects loop it loop send more level
from the preamp to the power amp creating
more volume and power amp saturation.
1/4" line
output:
No Speaker
Emulation
• Connects to
guitar
amplifier
!
input
• Connects to
amplifier
effects loop
return if
using in
!
"loop mode"
• Connects to
next pedal in
effects
!
chain.
9 volt battery goes in this compartment.
Easy change system so you don't have to remove from pedalboard.
Bypass switch Switches between true bypassed raw instrument
signal to signal fed through electronics of this unit
Connect external power supply unit here.
(not included)
Most Center Negative 9vDC supplies will
work. The Randall PPS1 is preferred as it
provides 15 volts DC offering more gain and
headroom than standard 9 volt.
1/4" instrument input:
Plug your guitar in
here!!!
(or you can connect
from effects loop send
if using in "loop
mode")
!
Advertisement
