D-Link DSL-584T User Manual page 70

Adsl2+ router

Hide thumbs Also See for DSL-584T:

Table of Contents

DSL-584T ADSL Router User Guide

QoS Configuration window for Port Mapping QoS

The Router can also be configured to use the QoS infomation contained in the header of IP packets. This will open the

following window. To set IP QoS for the router, first click the IP QoS check box in the middle of the window. Then

select the PVC to associate with the corresponding action and choose a maximum bandwidth and classification for this

combination. Then select the classification type using the Classified by pull-down menu. The choices are Disable, ToS,

Application, and User Define. Each choice will open the corresponding windows, shown following. The user may also

enable IGMP Proxy/Snooping for each PVC at the top of the window by choosing the PVC from the pull-down menu

and clicking the Enabled radio button and set a maximum Bandwidth in kbps from unlimited to 64 using the drop-

down menu. Click Apply to set the configuration.

Table of Contents