Summary of Contents for Blizzard Lighting Atmos FEAR HEX JET
- Page 1 HeX JET Blizzard Lighting, LLC www.blizzardlighting.com Waukesha, WI USA Copyright (c) 2015...
-
Page 2: Getting Started
Blizzard Lighting™ assumes no responsibility or liability for any errors or omissions that may appear in this user manual. Blizzard Lighting™ reserves the right to update the existing document or to create a new document to correct any errors or omissions at any time. -
Page 3: Safety Instructions
Caution! There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please visit our support website at: www.blizzardlighting.com/tickets. Page 3 AtmosFear™ Hex Jet Manual - Rev. A (c) 2015 Blizzard Lighting, LLC... - Page 4 Fade - Press to turn on + adjust the fade speed (1-10). Interval Fog - Press to turn on/off the interval fog timer. Strobe - Press to start strobe, press again for speed (1-10). Cancel (Stop) Page 4 AtmosFear™ Hex Jet Manual - Rev. A (c) 2015 Blizzard Lighting, LLC...
-
Page 5: Fuse Replacement
Maximum capacitance between conductors – 30 pF/ft. Maximum capacitance between conductor & shield – 55 pF/ft. Maximum resistance of 20 ohms / 1000 ft. Nominal impedance 100 – 140 ohms Page 5 AtmosFear™ Hex Jet Manual - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 6: Cable Connectors
Step 3: Connect other fixtures in the chain from output to input as above. Place a DMX terminator on the output of the final fixture to ensure best communication. Page 6 AtmosFear™ Hex Jet Manual - Rev. A (c) 2015 Blizzard Lighting, LLC... - Page 7 DIP-switches. Secondarily, the fixtures that follow may also require a slave setting. Page 7 AtmosFear™ Hex Jet Manual - Rev. A (c) 2015 Blizzard Lighting, LLC...
-
Page 8: Operating Adjustments
Press the <VOLUME> button again to abort. <MANUAL> Press and hold the <MANUAL> button down for continual fog and full on white light. Letting go of the button will stop the process. Page 8 AtmosFear™ Hex Jet Manual - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 9: Troubleshooting
Make sure all connectors are seated properly and securely. Responding / Use Only DMX Cables. Responding Er- Install a Terminator. ratically Check all cables for defects. Reset fixture(s). Page 9 AtmosFear™ Hex Jet Manual - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 10: Cleaning Instructions
Damage incurred in shipping is the responsibility of the shipper, and must be reported to the carrier immediately upon receipt of the items. Claims must be made within seven (7) days of receipt. Page 10 AtmosFear™ Hex Jet Manual - Rev. A (c) 2015 Blizzard Lighting, LLC... -
Page 11: Warranty
Behind every girls selfie is approximately 47 nearly identical photos that just didn’t cut it. 2-year limited warranty, does not cover mal- Warranty function caused by damage to LEDs. Page 11 AtmosFear™ Hex Jet Manual - Rev. A (c) 2015 Blizzard Lighting, LLC... - Page 12 Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting...
Need help?
Do you have a question about the Atmos FEAR HEX JET and is the answer not in the manual?
Questions and answers