Advertisement
Quick Links
CT66 Full HD 1080P DVR Instructions before use
Thank you for purchasing Car Dash Cameras Australia CT66 Full HD 1080P DVR.
Before use, please read this manual carefully to ensure the correct use of the product. Keep
this manual for future reference.
Operating Conditions
Don't expose your CT66 to high temperatures or direct sunlight. Do not put dash protectors
behind the camera as the heat reflected could cause product failure, this will void your
warranty. Do not use in dusty or Damp environments.
The equipment's normal working temperature is + 0 ° ‐ + 60 °, the humidity range is 10% ‐
80%. Please place the equipment in a safe place if these numbers are exceeded.
Cleaning
To clean your CT66, simply use a clean soft moist cloth.
Please do not modify or repair the equipment as it will void your 12 months Australian
warranty, it may also lead to equipment damage.
Menu Functions
1. low illumination high‐definition video （1080P@30fps）
2. The built‐in low illumination lens optimises Night Videos
3. 2.7 inch TFT Colour LCD Screen
4. The GSensor recognises impact sensitivity and automatically locks the video
5. Ignition on, camera starts
6. supports cycle Video or Loop Recording
7. HDMI output port
8. Supports up to 32 GB TF card
1
CT66 USER MANUAL
Advertisement
Summary of Contents for Wide CT66
- Page 1 CT66 USER MANUAL CT66 Full HD 1080P DVR Instructions before use Thank you for purchasing Car Dash Cameras Australia CT66 Full HD 1080P DVR. Before use, please read this manual carefully to ensure the correct use of the product. Keep this manual for future reference. Operating Conditions Don't expose your CT66 to high temperatures or direct sunlight. Do not put dash protectors behind the camera as the heat reflected could cause product failure, this will void your warranty. Do not use in dusty or Damp environments. The equipment's normal working temperature is + 0 ° ‐ + 60 °, the humidity range is 10% ‐ 80%. Please place the equipment in a safe place if these numbers are exceeded. Cleaning To clean your CT66, simply use a clean soft moist cloth. Please do not modify or repair the equipment as it will void your 12 months Australian warranty, it may also lead to equipment damage. Menu Functions 1. low illumination high‐definition video （1080P@30fps） 2. The built‐in low illumination lens optimises Night Videos 3. 2.7 inch TFT Colour LCD Screen 4. The GSensor recognises impact sensitivity and automatically locks the video 5. Ignition on, camera starts 6. supports cycle Video or Loop Recording ...
- Page 2 9. Camera battery charges while recording 10. Image monitor shows real‐time output 11. WDR (Wide Dynamic Range) Front view Back view Left view ...
- Page 3 Right view Top view Setup Instructions Start Up Before you insert the Memory card, personalise the menu. To set the menu you can use the built‐in battery, you can connect the car‐charger cable and turn on ignition or you can start the camera by connecting to your computer using the USB cable. Remove plastic film over the lens. Memory Card (Micro SD Card) 1. Format the Class 10 Micro SD memory card 2. Insert the memory card by carefully inserting it into the card slot. Not enough care or rough treatment may cause the SD card or the card slot to fail. ...
- Page 4 First Menu ‐ Video Menu (One press of M button) 1. Resolution: This camera is a Full Hi Definition camera but if you are away from the vehicle for hours and want to use the Motion Detection function, you can lower the resolution to 720P HD. This will give you more hours of recording on the SD card. 2. Loop Recording: We recommend you set this on 5 Minutes, that means that each video is of a 5 minute duration. 3. WDR: Turn WDR on, Wide Dynamic Range describes an attribute of an imaging Sensor that can record greater scene details than normal, from shadows to highlights. 4. Motion Detection: Should only be on when vehicle is parked and when there is a power source. 5. Power On Record: Turn ON, then when power is on, video will automatically record. 6. Power Off Delay: Set this to whatever duration you would like the camera to keep recording after power if turned off. 7. Power On Delay: Leave this off if you want the camera to begin recording immediately power is turned on. 8. Record Audio: ...
-
Page 5: Troubleshooting
Reset If the machine freezes or will not turn on, it can be caused by improper operation or an abnormal situation such as severe heat, reformat the SD card then press the reset button to re boot the camera. The reset button is on the bottom side of the dash cam. TROUBLE SHOOTING In the event of the camera not working as it should, please try the following: Camera won't record Turn off GSensor, Copy any files you want to keep to your computer or storage drive, Re format your SD card Ensure the card has been installed correctly, during the installation process, you should hear a clicking sound. Change the resolution, frames per second. Video is not clear Ensure that the camera lens and your windscreen is clean. Wipe off the dust and dirt off the lens. Menu does not respond Press the reset button to initialize the machine. Care and Maintenance Please take your camera out of the vehicle if temperatures exceed 50 degrees C. It is rated to 60 degrees but a simple rule of thumb is if you cannot stand the heat, the camera will struggle too. If adjusting the angle of the camera on your windscreen mount, loosen the nut first as you may break the camera case if you force it. ...