Page 1
Fuel Tank Sweeper ™ #9049 OPERATOR’S MANUAL Innovative Products of America Incorporated ® 888-786-7899 www.ipatools.com 234 Tinker Street, Woodstock, NY 12498...
Page 2
DO NOT USE WITH GASOLINE! • Transfers, filters and removes fine bio- contaminants, algae, etc. • Sweeping process removes contaminants such as rust, water, crude and dirt from oil tanks. • Circulates fuel additives completely for optimum results. • Improves fuel quality and restores cleanliness. •...
IMPORTANT SAFETY INSTRUCTIONS This manual contains safety and operating instructions for the #9049 Series. Refer to this manual for information on safe operation. Read, understand and follow all safety messages and instructions printed in this manual and on the equipment before operating.
TRANSFER PUMP SPECIFICATIONS • 115 VOLT/AC • 60HZ • 1/3HP • 6.5 AMPS • 30 MINUTE DUTY CYCLE NOTE: A Duty Cycle is the time specified for the motor to run continuously. An auto shut down and cool down time will engage. •...
Page 6
cleaner into the oil. After 48 hours, the algae should be killed off and the tank is ready for sweeping. If convenient and safe, you may use a small jack to elevate the tank a few degrees on one side to allow the majority of contaminates to collect on one end of the tank.
Page 7
2. Keep the flex staff adapter at the bottom of the tank and slowly sweep back and forth collecting all contaminants from the bottom of the tank. ™ 3. The Tank Sweeper will remove the bottom contents of the tank where the majority of fuel contaminants exist, i.e., water, crude, algae and rust.
Page 8
from the bottom of a fuel tank so the operator can see what contaminants are present. TO OPERATE: 1. Insert the Sample Stick through one of the cap openings at the top of the tank all the way until it contacts the bottom of the tank. 2.
Page 10
Innovative Products of America Incorporated ® has established a Limited One Year Warranty Policy for the 9049 – Fuel Tank Sweeper™, not including any wearable parts, i.e. batteries, etc. 1 Year Limited Warranty/Return or Replace Policy: These products are covered for 1 year from date of original user purchase under the stipulations of the Standard Warranty.
Need help?
Do you have a question about the 9049 and is the answer not in the manual?
Questions and answers