Table of Contents
Advertisement
Quick Links
WDEM-7680LPDN-IO
WDEM-7680LPDN-IOP
License Plate Capture Wide Dynamic
Camera with I/O
USER MANUAL
Built with Sony's latest Effio DSP and 1/3" 960H Double-speed CCD WD image sensor,
WDEM-7680LPDN-IO
has the capability of achieving resolutions of over 680 TVL,
the
WDR function can produce clear and true image without noise even in tunnels, an
environment with very strong light, and can capture vehicle license plate numbers at
speed up to 120mi/hr / 200km/hr during the day, and 35mi/hr / 60km/hr at night.
The most exciting feature is the Multi-Shutter modes, Scheduled Shutter Mode, Manual
Shutter Mode and Auto Shutter Mode. WDEM-7680LPDN-IO supports Balun RS-485
remote control to control the OSD remotely. When it comes to Car License Plate Camera,
WDEM-7680LPDN-IO is definitely ideal to install at any kind of car entrances and exits
for capturing car license plates.
** Replacing SHM-7540LPDN-IO
Copyright © 2012. All Rights Reserved.
Advertisement
Table of Contents
Summary of Contents for Okina WDEM-7680LPDN-IO
- Page 1 Shutter Mode and Auto Shutter Mode. WDEM-7680LPDN-IO supports Balun RS-485 remote control to control the OSD remotely. When it comes to Car License Plate Camera, WDEM-7680LPDN-IO is definitely ideal to install at any kind of car entrances and exits for capturing car license plates.
- Page 2 Please read the Manual before attempting to use this product. Specifications and appearance are subject to change without notice. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems). This symbol on the product or on its packaging indicates that this product shall not be treated as household waste.
- Page 3 When the video product exhibits a distinct change in performance. LIMITED WARRANTY OKINA USA products are covered under warranty for one (1) year from the date of purchase. The warranty will automatically be voided if any of the following occurs: 1.
-
Page 4: Table Of Contents
TABLE OF CONTENTS Introduction ……………………………………………….….……….… 5-6 1.1 Features ………………………………………………………..……..5 1.2 Package Contents ……………………………………….…………… 1.3 Specifications …………………………………………………………… 6 Camera Overview …………………………………………………….… 7-9 2.1 Dimensions …………………………………………..…………….….. 7 2.2 Parts and Functions ………………………………..………………. 7-9 OSD Operation ……………………………………………….……….. 10-12 3.1 OSD Control Buttons ……………………………………..………..…. 10 3.2 OSD Operation ………………………………………………..……... -
Page 5: Introduction
1. INTRODUCTION 1.1 Features 1/3” Sony 960H Ex-View HAD CCD II Sony Effio WDR II DSP Color: 680 TVL / B&W: 700 TVL Color: 0.03 Lux @ F1.2 / B&W: 0.01 Lux @ F1.2 ICR: 0.005 Lux @ F1.2 / Sens-up: 0.0001 Lux @ F1.2 ... -
Page 6: Specifications
1.3 Specifications Model WDEM-7680LPDN-IO WDEM-7680LPDN-IOP TV System NTSC Image Sensor 1/3" Sony 960H Ex-View HAD CCD II Number of Total Pixels 1020(H) x 508(V) 1020(H) x 596(V) Resolution Color:680TVL, B&W:700TVL ; Sony Effio WDR II Color: 0.03 Lux @ F1.2, B/W: 0.005 Lux @ F1.2, Minimum Illumination Sense-up: 0.0001 Lux @ F1.2... -
Page 7: Camera Overview
2. CAMERA OVERVIEW 2.1 Dimensions 2.2 Parts and Functions... - Page 8 ① Lens Mount This mount is used to install a CS-mount lens. CS-adaptor ring is required when using a C mount lens. ② Camera Mounting Screw Holes Screw holes for mounting the camera. ③ Mount Adaptor The adaptor can be attached onto the top or the bottom of the unit. ④...
- Page 9 ⑥ Video Connector Video can be outputted via this connector. (75Ω). ⑦ IRIS Mode Selection Switch Select DC or VIDEO mode according to the lens. ⑧ Video Connector Video can be outputted via this connector. (75Ω). ⑨ Communication Connectors 1. RS485+ 2.
-
Page 10: Osd Operation
3. OSD OPERATION 3.1 OSD Control Buttons ① Use this button to move the cursor upwards to the desired item. ② RIGHT Use this button to move the cursor to the right to select or to adjust the parameters of the selected item. The parameter increases when the right button is pressed. -
Page 11: Osd Operation
3.2 OSD Operation ** MAIN MENU ** ┘ LENS AUTO < ┘ EXPOSURE < WDR/BLC/FOG ┘ WHITE BALANCE < ┘ 2DNR & 3DNR < ┘ DAY/NIGHT AUTO < ┘ IMAGE < ┘ EFFECT < ┘ SYSTEM < ┘ EXIT < Start to operate the OSD menu Press the ENTER button to bring up the OSD main menu to start operating OSD menus. -
Page 12: Configuration
IV. Return to the previous page Select RETURN and press the ENTER button to return to the previous page. V. Exit the OSD menu Select EXIT with the button or and press the ENTER button to exit the OSD menu. -
Page 13: Exposure
4.2 Exposure When the MAIN MENU is displayed on the screen, use the UP and DOWN buttons to the EXPOSURE and press the ENTER button to do further setups. ** MAIN MENU ** ** EXPOSURE ** ┘ LENS AUTO < MODE AUTO IRIS ┘... -
Page 14: Wdr/Blc/Fog Re
*AGC GAIN Use LEFT and RIGHT buttons to adjust AGC GAIN. The bigger the number, the brighter the screen can be. Note that the noise will increase as well. Option: 000~200. *SENSE UP SENSE UP is used to maintain a brilliant, vivid screen image by automatically detecting changes in the level of light under low light level conditions. - Page 15 ** WDR ** |||||||||| ||||| LEVEL DARK AREA MIDHIGH ||||||| |||||||| BRIGHT AREA RETURN<┘ Sub-Menu under WDR mode. LEVEL Use the LEVEL function to adjust the brightness of the whole area. Level: 000~255 DARK AREA Use LEFT and RIGHT buttons to adjust DARK AREA. Option are HIGH, MIDHIGH, MID, MIDLOW and LOW.
- Page 16 AUTO Set AUTO LEVEL to adjust the BLC automatically. The range is 000~015. MANUAL Set AREA and MANUAL LEVEL to adjust the BLC value manually. The default AREA is BOTTOM 1/3, and the default LEVEL is MID. Stay with the default value, the bottom 1/3 area will be the brighter area, with the middle level of brightness.
-
Page 17: White Balance
4.4 White Balance The screen color can be adjusted by using the WHITE BALANCE function. Please use the UP and DOWN buttons to WHITE BALANCE on the MAIN MENU and press the ENTER button to do further setups. Please select the desired item and press LEFT and RIGHT buttons to adjust the settings. - Page 18 *ANTI CR (Color rolling suppression) Select to set the white balance mode to the ANTI CR mode. Follow the instructions on the screen. Wait for a few seconds for the camera to set up. When completed, there will be a message displayed on the screen. NOTE: The White Balance can not fully function under the following conditions.
-
Page 19: 2Dnr & 3Dnr (Dynamic Noise Reduction)
4.5 2DNR & 3DNR (Dynamic Noise Reduction) ** MAIN MENU ** ** 2DNR & 3DNR ** ┘ LENS AUTO < ┘ EXPOSURE < 2DNR MIDLOW WDR/BLC/FOG 3DNR MIDLOW ┘ WHITE BALANCE < ┘ 2DNR & 3DNR < ┘ DAY/NIGHT AUTO <... -
Page 20: Day/Night
4.6 Day/Night The camera can be set in Color or B/W mode in the Day/Night function. NOTE: EXT function is available for BOX cameras only. (Optional for OC version.) Communication Connectors (including RS485) are available for BOX cameras only. ** MAIN MENU ** The modes under the function are: ┘... - Page 21 *AUTO ** DAY/NIGHT AUTO ** LIVE LEVEL ||||||||||||||| ||||| 063 DAY->NIGHT |||||||||||||||||| 003 NIGHT->DAY ||||||| ||||||||||||| 025 DELAY TIME ||||||||||||||||||| 005 BURST NIGHT OUTPUT RETURN<┘ Sub-Menu under the DAY / NIGHT AUTO mode s Menu The camera will switch to DAY/Color mode or NIGHT/B&W mode according to the set value.
- Page 22 • BURST : Turn the BURST function off to reduce the color noise under B&W mode. However, not every DVR machines can receive video signals without the color burst signals. If the camera cannot switch back to COLOR mode from B&W mode, please turn the BURST function on. NOTE: The BURST function is adjustable under B&W and EXTERNAL mode.
- Page 23 EXTERNAL mode allows the user to switch the DAY/NIGHT mode with external signals. For example, you can synchronize the DAY/NIGHT mode between the camera and the infrared LED illuminator. For the camera with the light sensor, it is suggested to set the DAY/NIGHT mode to EXTERNAL to ensure the best result.
-
Page 24: Image
4.7 Image ** IMAGE ** ** MAIN MENU ** RESOLUTION ┘ LENS AUTO < SHARPNESS ||||||||||| ||||||||| 010 ┘ EXPOSURE < LOW LUX SHARP. X0.5 WDR/BLC/FOG CONTRAST ||||||||| ||||||||||| 000 ┘ WHITE BALANCE < SATURATION ||||||||| ||||||||||| 000 ┘ 2DNR & 3DNR <... -
Page 25: Effect
*HUE Level: -050~050 Select to adjust the value of the hue. *MIRROR NORMAL, VERTICAL (vertical rotated), MIRROR (horizontal rotated), and ROTATE (vertical and horizontal rotated). *POS. / NEG. ON/OFF. Positive/Negative Reversal. Select ON or OFF to enable or disable this function. *WHITE PIXEL COMP (WHITE PIXEL COMPENSATION) Level: 000~010. - Page 26 *MOTION DETECTION Options are ON/OFF. Set to ON and click ENTER to bring up submenu for further settings. ** MOTION DET ** DETECT SENSE ||||||||||| ||||||||| 115 BLOCK DISP ┘ DETECT AREA < ┘ MONITOR AREA < ALARM OUT ALARM TIME ┘...
- Page 27 ALARM TIME (Only available to cameras with Communication Connectors) Alarm time can be set from 000 to 255 seconds. *PRIVACY MASK Options are ON/OFF. Set to ON and click ENTER to bring up submenu for further settings. ** PRIVACY MASK ** AREA SEL 1/15 MODE...
- Page 28 MOSAIC Options are ON/OFF. Use LEFT and RIGHT buttons to display the block in mosaic or not. *DIS (Digital Image Stabilizer) Options are OFF and ON. When set to ON, the DIS function will help to prevent vibration, and the E-Zoom function will be disabled. *E-ZOOM ** E-ZOOM ** RATIO...
-
Page 29: System
MODE Select to choose HLC mode from OFF, ON, and AUTO. HLC function is not available when the WDR mode is selected under the WDR menu. CLIP LEVEL Adjust the value of the HLC clip level from 000 to 255. SCALE Adjust the value of the HLC scale from 000 to 015. - Page 30 *CAMERA TITLE ** CAMERA TITLE ** CAMERA ABCDEFGHIJKLMNOPQRSTUV WXYZ0123456789 - ! ” # $ % & ’ ( ) _ ` , ￥ : ; <=>?@\ ^ * . x+/ ← →↑↓ RETURN<┘ Sub-Menu under the CAMERA TITLE mode ← →↑↓ s Menu Select ←, →, ↑...
- Page 31 *SYNC (Only available to cameras with AC power input) Use the LEFT & RIGHT buttons to switch SYNC mode between INT(Internal) and L.L.(Line Lock). Set to L.L. and click ENTER to bring up submenu for further settings. *LANGUAGE Use the LEFT & RIGHT buttons to select the language preference. The options are: •ENGLISH •...
-
Page 32: Balun Function (Utp)
4.10 Balun Function (UTP) A Balun's function is available for BOX cameras only. It would normally require 3 terminals (Video + Power + RS485) to succeed a connection. However, via Balun, 1 is sufficient. The cameras OSD can be used and controlled remotely via RS485 communication port. -
Page 33: Related Products
5. RELATED PRODUCTS 5.1 Recommended Lens 3~80mm 2.7~12mm 5~60mm IR D&N Auto Iris IR D&N Auto Iris Auto Iris LEN0380DCIR-J LEN2712DCIR-J LEN0560DC-J Made in Japan Made in Japan Made in Japan 1/3" Aspherical 1/3" Aspherical ... -
Page 34: Recommended Housing & Bracket
5.2 Recommended Housing & Bracket 11 Hi-Power IR LED Illuminator with Die-Cast Aluminum Housing & Bracket 11 Super Power IR LED, 6pc x 25º / 5pc x 45º IR Distance up to 395ft / 120m IP66 Rating ... - Page 36 www.okinausa.com MADE IN TAIWAN Copyright © 2012. All Rights Reserved. L-817 www.okinausa.com R201212-V27...