Buttons And Functions; First Time Use; Battery And Charging - Learning Time Eltee Pad User Manual

Buttons and Functions

Power
Audio-out
USB slot
DC charger point
HDMI slot
SD card slot
Camera
Speakers
Serial number
Power: Press and hold for three seconds to turn on or off.
Audio-out: You may connect headphones or external speakers.
USB slot: Charge your Eltee Pad using the USB cable provided. Insert
one end of the USB cable into this slot, and the other end into your
USB plug or a computer. You may need to use your own USB plug or a
converter if the two-pin plug provided does not work in your country.
DC charger point: Connect here if you use the other cable provided
with the USB plug.
HDMI slot: You may connect your Eltee Pad to a TV monitor by using
your own HDMI cable, using the converter provided.
SD card slot: You can insert your own micro SD card to expand the
memory to up to 32GB.
2

First Time Use

Please charge your Eltee Pad for at least six hours before the first
Camera use.
A registration screen will appear when you turn on your Eltee Pad
for the first time. The purpose of registration is to ensure that your
warranty is activated, and that you get notifications for all updates.
When you're connected to Wi-Fi, simply complete the registration
form with your name and email address, and press the submit button.
You will receive a confirmation email.
Your child may take a 'selfie' using the front camera and upload it as a
profile photo. This can be changed later.

Battery and Charging

You can charge your Eltee Pad through a mains power supply by using the
USB plug and the DC cable, or the USB cable. You can also charge it by
connecting the USB cable to a computer. You may need to use your own
USB plug or a converter if the two-pin plug provided does not work in your
country.
The screen will show a battery sign when Eltee Pad is charging. You
may go into the 'Settings' (explained in the next section) to check the
status of the battery.
Whenever the battery gets below 20% there will a notification on the
screen, alerting you to charge the battery.
Allow the battery to fully charge before disconnecting.
Eltee Pad will go into a sleep mode if not used for five minutes. A quick
tap on the power button will wake it up.
Warning: Young children must not handle any charging cables or power
sockets.
3