Table of Contents
Advertisement
F
o
l
d
i
n
g
T
h
e Trotinette
F
o
l
d
i
n
g
T
h
e
1. Unplug the power connecting plugs.
2. Unscrew the bolts and nuts from the con-
necting tube clamp using the enclosed allen
wrenches .
3. Lift the connecting tube (which is also attached
to the handlebar tube).
4. Carefully place the handlebar tube on the
footrest frame.
5. Finger screw the bolts and nuts back to the
connecting tube clamp to avoid any mis-
placements.
15
15
F
o
l
d
i
n
g
T
h
e Trotinette
F
o
l
d
i
n
g
T
h
e
Battery: (for professional use only)
The E-Trotinette is powered by three 12 volt, re-
chargeable batteries secured in a single compart-
ment. Other than recharging, these batteries need
no maintenance. To prolong battery life, you must
recharge the battery after each use. You must
also charge your Trotinette if it has not been
used for 30 days or more. If you must replace
the battery pack, it is located inside the battery
compartment on the footboard. To get to the
battery pack, remove the compartment cover by
loosening the screws. To remove the batteries
disconnect the wires from the battery terminals.
Replace the battery pack with a new one and
reconnect the wires. Follow the instructions on
charging batteries to charge the new batteries.
16
16
Advertisement
Table of Contents
