Journey Meridian 36M Basic Operation Manual

BLU-RAY /DVD PLAYER
™
AND SOUND BAR
SYSTEM
(Model 36M)
™
The Blu-ray /DVD Player and Sound
Bar System operates from 120-volt AC
household current only, so you must have
either the shoreline connected, the generator
running, or the inverter turned on (if
equipped). The TV is connected to the
Sound Bar and Blu-ray/DVD player.

To Watch a Blu-ray

1. Turn "ON" the TV, HDMI Video
Selection System, and Blu-ray/DVD
player.
2. Determine which TV you want to use
(e.g. "Lounge" for lounge TV) and
select Source (1) for Blu-ray.
3. Set TV Input to HDMI1 by using the TV
remote or the Controls on the TV.
4. Set Blu-ray/DVD player Source to
Video by using the Blu-ray/DVD player
remote.
5. Insert Blu-ray or DVD into the player.
Blu-ray or DVD will begin to load
automatically. The Blu-ray/DVD player
screen will typically show
"LOADING".
6. The Blu-ray or DVD may load
directly to the main title/menu
screen or it may begin to play previews.
You may be able to skip previews if
desired by pressing the chapter "skip"
button on the Blu-ray/DVD player
remote until you see the main menu
screen.
7. When the main menu screen
appears, use the arrow
buttons on the Blu-ray/
DVD player remote to
select the desired entry or press the
"Enter" button on the Blu-ray/DVD
player remote to begin playing the
feature.
8. Volume is adjusted with the Blu-ray/
DVD player remote or TV remote.
TV Sound through the Sound Bar
(Lounge TV Only)
When watching TV programs
(broadcast, cable, or satellite), the TV
normally plays sound through its own built-
in stereo speakers. To connect TV sound
output to the Sound Bar for a richer sound
quality, follow these steps:
• Turn "ON" the TV and Sound Bar.
• Select the TV channel you wish to
watch.
• Set Sound Bar Source to "AUX" or "D
IN" (optical audio in) by using the panel
of the Sound Bar or the Sound Bar
remote until audio is heard.
.
• On the Sound
Bar Remote,
press the
input button.
• On the Sound Bar,
press the input button.
• Turn TV and/or Sound Bar volume up or
down.

Turning TV Speakers On/Off

• Press MENU button on remote.
• Select Sound option.
• Select between Exterior Speaker or TV
Speaker.

Further Information

See the manufacturer's user guide
provided in your InfoCase for complete
feature descriptions and operating
instructions.
Continued—