FG Flight T53 Owner's Manual

FG Flight T53 Owner's Manual

T series

Advertisement

Quick Links

Thank you for purchasing this Flying Gadgets product, please read this manual carefully before
use and retain it for future reference.
1.The coaxial-rotor design and built-in gyro are used to increase the helicopter's
stability, making it the perfect choice for beginners.
2.By using new infra-red auto connection technology users can operate three
helicopters simultaneously.
3.On a full battery charge, the helicopter can fly for approx 9 minutes.
4.The triple circuit protection the flight improves the service life of the helicopter.
5.The camera has a built in microphone and can either take video or photo
1. Please read this instruction manual carefully before using this product
and operate it according to the instructions.
2. Keep small parts away from children.
3. Keep the batteries away from fires and high temperatures.
4. When flying the helicopter keep it a minimum of 1-2 metres away from
yourself and others to avoid injjury.
5. Do not modify or take this product apart.
6.Keep the helicopter at all times in your sight whilst flying.
7. Always make sure children are supervised by an adult whilst using the
helicopter.
8. Only use recommended batteries in the product.
9. Insert the batteries in the correct polarity.
10. Do not recharge non rechargable batteries.
11. Do not mix old and new batteries.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T53 and is the answer not in the manual?

Questions and answers

Summary of Contents for FG Flight T53

  • Page 1 Thank you for purchasing this Flying Gadgets product, please read this manual carefully before use and retain it for future reference. 1.The coaxial-rotor design and built-in gyro are used to increase the helicopter’s stability, making it the perfect choice for beginners. 2.By using new infra-red auto connection technology users can operate three helicopters simultaneously.
  • Page 3 away from uses Turn the remote control “OFF” before operating. Make sure the helicopter is on a flat stable surface.Turn the helicopter on by the power switch. The searchlight on the front of the helicopter will blink rapidly. After a few seconds the searchlight will blink slower, this indicates that the helicopter is ready to connect to the remote control.
  • Page 4 Push the left control stick up, and the rotation speed of the main rotor increases and the helicopter ascends accordingly. Push the left control stick down, and the rotation speed of the rotor decreases and the helicopter decends accordingly. When the helicopter is in the air, turn the control stick to the left, the helicopter will spin to the...
  • Page 5 If the helicopter is spinning clockwise move the gyro regulation button to the left until the helicopter stops spinning. The red power light on the remote control will start to blink fast when the battery voltage drops below a certain level in the helicopter. The helicopter can be out of control.
  • Page 6 TIPS To stop filming, please press the camera button on the remote control. If you unplug the battery cable or take out the TF memory card from the camera module it will result in the loss of the video data. To avoid helicopter crashing,please do not insert or take out the TF memory card from the camera module,whilst the helicopter is on.
  • Page 7 When the controller/helicopter is underpowered, the control distance is shorter. If the helicopter is underpowered it may have difficulty taking off. If the helicopter becomes damged then repair it. If you fly it damaged then it could be out of control and cause an injury.

Table of Contents